Mechatronics Programs.com

Automation engineering technology

Best Automation Engineering Technology Programs (2027)

Automation engineering technology programs focus on building, wiring, programming, and maintaining automated manufacturing and process systems using PLCs, motor drives, sensors, industrial networks, and robotics. This ranking covers 89 verified programs across 29 states for future automation technicians and engineering technologists seeking applied lab coursework.

Taylor Rupe, editor of MechatronicsPrograms.com

edited by , b.s. computer science · software engineer

updated

Programs ranked

89

10 bachelor's · 63 associate · 16 certificates

States covered

29

Led by IL (6), OH (6), WI (6)

Annual tuition range

$1,380 to $18,900

All 89 listed programs

BLS median wage

$73,900

SOC 17-3024, BLS May 2025

Best Automation Engineering Technology Programs, Ranked (2027)

  1. 1

    Ivy Tech Community College, Indianapolis · Indianapolis, IN

    Advanced Automation & Robotics Technology (Mechatronics)

    Certificate On-campus Regionally accredited (HLC) $4,300/yr 9 mo

    Ivy Tech operates Indiana's largest statewide community college system, with the Indianapolis campus housing the flagship mechatronics offerings. The certificate plugs students into two major apprenticeship pathways - Toyota T-TEN (mechatronics-track) and Cummins' apprenticeship program - both of which pair the academic credential with paid full-time technician roles. Eli Lilly's pharma manufacturing operations and the broader Central Indiana automotive supplier base round out the placement footprint.

    27 credits

    What you study

    Programmable Logic ControllersIndustrial RoboticsElectrical and Mechanical TroubleshootingIndustrial Software and ComputersAdvanced Manufacturing Systems

    What stands out

    • 27-credit, three-semester Mechatronics Certificate (CT) offered in Indianapolis and 19 other locations
    • ATMAE accredited; tuition is $4,816 or free for eligible residents via Next Level Jobs
    • Stacks into the 34-credit Technical Certificate and 75-credit AAS degree
    • Embeds MSSC Certified Production Technician, OSHA 10-Hour, and Siemens Level 1 certifications

    Industry credentials

    MSSC Certified Production Technician (CPT)OSHA 10-HourSiemens Level 1 Certification

    Industry partners: Cummins, Eli Lilly, Toyota

    Apprenticeship: Toyota T-TEN, Cummins Apprenticeship

    Vendor partner: fanuc-cert

    Visit official program page

    Overall

    76

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 80
    15% 70
    15% 92
    10% 90
    5% 80
  2. 2

    Tennessee College of Applied Technology, Shelbyville · Shelbyville, TN

    Industrial Maintenance Automation Diploma

    Certificate On-campus Institutionally accredited $4,623/yr 20 mo

    Tennessee Colleges of Applied Technology operate on a diploma-and-certificate model rather than the AAS structure most community colleges use - students earn a credential in 20 months of focused full-time technical training, no general-education requirements. TCAT Shelbyville's program (officially titled "Industrial Maintenance Automation") covers industrial controls, hydraulics, PLCs, and automation systems with heavy lab-hours weighting. Strong placement into the Nissan Smyrna and Calsonic Kansei (now Marelli) supply chain, plus Tyson Foods' middle-Tennessee processing plants.

    2,160 clock hours

    What you study

    Production Machine OperationApprentice Electrical SystemsFluid Power SystemsProgrammable Logic ControllersIndustrial and Automation Maintenance

    What stands out

    • 2,160 clock-hour, 20-month diploma offered across Shelbyville, Winchester, and Fayetteville campuses
    • Certificates awarded at 432, 864, 1,296, and 1,728 clock hours
    • Full-time day schedule (7:45 am to 2:15 pm) plus part-time evening option
    • Published program tuition and fees total $7,705 plus $2,653 for books and supplies

    Industry credentials

    WIN Work Ready

    Industry partners: Nissan, Calsonic Kansei, Tyson Foods

    Apprenticeship: TN Reconnect

    Visit official program page

    Overall

    74

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 80
    15% 70
    15% 84
    10% 90
    5% 65
  3. 3

    Tennessee College of Applied Technology, Pulaski · Pulaski, TN

    Automation, Process and Production Systems

    Certificate On-campus Institutionally accredited $4,623/yr 12 mo

    TCAT Pulaski sits in the middle of south-central Tennessee's manufacturing corridor, with Hankook Tire Tennessee, Snap-on Tools' Elizabethtown plant, and several automotive-supplier operations as the primary placement pipeline. The Automation, Process and Production Systems program is TCAT Pulaski's mechatronics equivalent - covering PLCs, robotics, controls, and the broader automated-systems skill set. TN Reconnect covers tuition for eligible Tennessee residents 25+, making this one of the more affordable paths into the trade.

    1,296 clock hours

    What you study

    Lean Manufacturing and Six SigmaOSHA and Safety FundamentalsCAD and 3D PrintingHydraulics and PneumaticsIndustry 4.0 FundamentalsManual Machining and MetrologyIndustrial Robotics Programming and Maintenance

    What stands out

    • 1,296 clock-hour full-time daytime program completed in 12 months (3 trimesters)
    • Three diploma paths: Robotic Automation, Additive Manufacturing, and Injection Molding Technician
    • Certificates awarded at 432 hours (Production) and 864 hours (Mechanical Systems)
    • Published total tuition and fees are $4,623 plus $546 for textbooks and supplies

    Industry partners: Hankook Tire, Snap-on

    Apprenticeship: TN Reconnect

    Visit official program page

    Overall

    73

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 80
    15% 70
    15% 76
    10% 90
    5% 65
  4. 4

    Truckee Meadows Community College · Reno, NV

    Automation and Robotics, Manufacturing Technologies AAS

    Associate On-campus Regionally accredited (NWCCU) $8,175/yr 24 mo

    Truckee Meadows Community College offers a 60-credit, four-semester Automation and Robotics AAS in its Applied Technology Division for students entering advanced manufacturing. Coursework builds from industrial safety, mechanical drives, fluid power, and electrical circuits to PLC programming, industrial robotics, and a six-credit IIoT, networking, and data analytics class. General education math, science, and human relations requirements are embedded directly inside technical courses. Graduates train to read technical prints, apply statistical process control, and integrate automated production systems.

    60 credits

    What you study

    Industrial roboticsProgrammable logic controllersIIoT and industrial networkingFluid power and pneumaticsMechanical drive systemsAC motor controlsElectrical and electronic circuitsAutomated production systems

    What stands out

    • 60-credit, four-semester plan in TMCC's Applied Technology Division
    • Includes a 6-credit IIoT, networking, and data analytics course
    • Math, science, and human relations requirements embedded in technical classes
    • Includes AAD 201, required for TMCC's BAS in Cyber-Physical Manufacturing

    Industry partners: Tesla Gigafactory Nevada, Panasonic, Switch

    Apprenticeship: Tesla Manufacturing Development Program

    Visit official program page

    Overall

    73

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 85
    15% 70
    15% 84
    10% 70
    5% 65
  5. 5

    Kansas City Kansas Community College · Kansas City, KS

    AAS in Automation Engineer Technology

    Associate On-campus Regionally accredited (HLC) $2,674/yr out-of-district 24 mo

    Kansas City Kansas Community College's two-year AAS in Automation Engineer Technology trains technicians to install, calibrate, modify, and maintain automated systems in support of engineers. Instruction spans computer systems, electronics and instrumentation, PLCs, electric, hydraulic, and pneumatic controls, actuators and sensors, process control, robotics, welding, CAD, machining, and metrology. Students can also join KCKCC's FAME program for placement with sponsoring employers alongside classroom training. Graduates enter industrial maintenance, calibration, and robotics roles or continue toward an engineering degree.

    Wyandotte County in-district: $85 tuition ($110 with fees) per credit hour (2026-27)

    What you study

    Electronics and instrumentationProgrammable logic controllersElectric, hydraulic, and pneumatic controlsActuators, sensors, and process controlIndustrial roboticsCAD, machining, and metrologyIndustrial welding

    What stands out

    • FAME program pairs classroom automation training with placement at sponsoring employers
    • Combines PLC, robotics, and process control training with CAD, machining, welding, and metrology

    Apprenticeship: FAME

    Visit official program page

    Overall

    72

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 85
    15% 70
    15% 60
    10% 100
    5% 65
  6. 6

    Estrella Mountain Community College · Avondale, AZ

    AAS in Automated Industrial Technology

    Associate On-campus Regionally accredited (HLC) $5,820/yr 24 mo

    Estrella Mountain Community College in Avondale hosts the first US-registered TSMC Mechatronics and Electromechanical apprenticeship - first cohort graduated 2026. AIT (Automated Industrial Technology) AAS is the credential pipeline for TSMC Arizona's $65 billion Phoenix fab campus.

    Industry partners: TSMC Arizona, Intel Chandler

    Apprenticeship: TSMC Registered Apprenticeship (Mechatronics & Electromechanical)

    Visit official program page

    Overall

    72

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 85
    15% 70
    15% 76
    10% 80
    5% 65
  7. 7

    Hawkeye Community College · Waterloo, IA

    AAS in Industrial Automation Technology

    Associate Hybrid Regionally accredited (HLC) $6,322/yr 24 mo

    Hawkeye Community College's 64-credit, two-year AAS in Industrial Automation Technology uses a hybrid competency-based model where lectures and quizzes run online and labs meet in person. Students train to install, program, and troubleshoot PLCs, CNC machines, robotics, and electromechanical systems using FANUC, Siemens, and Rockwell platforms, with documented transfer pathways into the University of Northern Iowa's Automation Engineering Technology and Industrial Management programs.

    64 credits

    What you study

    Electrical and electromechanical maintenanceFluid power and hydraulics troubleshootingInstrumentation and controlMotors and electric motor drivesThree-course PLC programming sequenceIndustrial networkingApplied industrial roboticsMachine shop processes

    What stands out

    • 64-credit Fall-start AAS using self-paced Competency-Based Education with online lectures and daytime labs
    • Labs feature FANUC, Allen-Bradley, Siemens, Okuma, Hardinge, and Rockwell industrial equipment
    • Qualifies for the Future Ready Iowa Last-Dollar Scholarship covering up to 100% of tuition
    • Documented transfer pathways to UNI's Automation Engineering Technology and Industrial Management degrees

    Industry partners: Advanced Heat Treat Corporation, Blackhawk Engineering, ConAgra Foods, Inc., Iowa Laser Technology, John Deere, Nestlé USA, Rockwell Automation, Target Distribution Center, TDS Automation, Inc., Tyson Foods, Inc.

    Visit official program page

    Overall

    72

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 85
    15% 75
    10% 80
    5% 65
  8. 8

    Clovis Community College · Fresno, CA

    AS in Mechatronics/Industrial Automation

    Associate On-campus Regionally accredited (ACCJC) $1,380/yr 24 mo

    Clovis Community College offers a two-year Associate in Science in Mechatronics/Industrial Automation combining general education with Automation, Robotics and Mechatronics lab courses. Every technical course pairs instruction with work in an industrial mini-factory lab running Allen-Bradley CompactLogix PLCs, PowerFlex drives, Honeywell process controllers, Ignition SCADA, and FANUC robots. The degree supports transfer to four-year bachelor's programs and prepares graduates for design, operation, and maintenance roles across food production, petroleum, manufacturing, and logistics.

    What you study

    Mechanical systemsAC and DC electricityElectric motors and controlsProgrammable logic controllersInstrumentation and process controlIndustrial communications networksIndustrial automation systemsIndustrial robotics

    What stands out

    • Lab features Rockwell Studio 5000, FactoryTalk View HMI, Ignition SCADA, and FANUC robots
    • Part of a six-credential ARM ladder including two job skills certificates
    • Includes a 3-unit Industrial Work Experience course option
    • College reports graduates earning $20 to $32 per hour without prior experience

    Industry partners: Allen-Bradley, Rockwell Automation

    Vendor partner: rockwell

    Visit official program page

    Overall

    71

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 74
    10% 100
    5% 65
  9. 9

    Doña Ana Community College · Las Cruces, NM

    Automation and Manufacturing Technology AAS

    Associate On-campus Regionally accredited (HLC) $1,842/yr 24 mo

    Dona Ana Community College offers a 61-credit Associate of Applied Science in Automation and Manufacturing Technology structured over four semesters. Students study solid modeling, analog and digital electronics, semiconductor devices, industrial print reading, machine operation and safety, and electromechanical devices or aerospace workplace practices. General education courses mirror offerings at NMSU's Las Cruces campus for students planning to transfer.

    61 credits

    What you study

    Solid ModelingElectronics I and IIDigital Electronics I and IISemiconductor DevicesPrint Reading for IndustryMachine Operation and SafetyElectromechanical Devices

    What stands out

    • 61-credit, four-semester AAS requiring C- or higher in all technical courses
    • Includes a choice of Cooperative Experience I, Information Systems, or Career Readiness Prep
    • General education math, physics, and English transfer directly to NMSU Las Cruces
    • Also offered: Automation and Manufacturing and Basic Manufacturing certificates

    Industry partners: Spaceport America, Virgin Galactic, White Sands Missile Range

    Visit official program page

    Overall

    71

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 74
    10% 100
    5% 65
  10. 10

    Central New Mexico Community College · Albuquerque, NM

    Industrial Automation Technology (Mechatronics) Certificate

    Certificate Hybrid Regionally accredited (HLC) $2,060/yr 12 mo

    Central New Mexico Community College offers Industrial Automation Technician certificate training through its Mechatronics program in Albuquerque. Combining online coursework with hands-on laboratory exercises, students learn electrical circuits, mechanical systems, robotics, and PLC programming with no prior tool experience required. The curriculum aligns with Smart Automation Certification Alliance standards so students can earn micro-credentials and SACA Gold certification.

    What you study

    Basic Electrical CircuitsMechanical SystemsPLC ProgrammingIndustrial RoboticsAutomated Equipment TroubleshootingIndustry 4.0 Systems Integration

    What stands out

    • Blends online instruction with hands-on campus lab work; no prior tool experience needed
    • Aligned with Smart Automation Certification Alliance (SACA) Gold certification and micro-credentials
    • Offers Credit for Prior Learning (CPL) toward certificate requirements
    • Local employers guarantee interviews and host student internships, including at Intel

    Industry credentials

    SACA gold certification

    Industry partners: Intel Rio Rancho, General Mills

    Visit official program page

    Overall

    71

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 85
    15% 66
    10% 100
    5% 65
  11. Bachelor's On-campus ABET-ETAC $6,401/yr

    Housed in the College of Engineering and Science, Louisiana Tech University's BS in Instrumentation and Control Systems Engineering Technology (ICET) is accredited by ABET-ETAC under Instrumentation and Control Systems Engineering Technology criteria. Students train on sensors, programmable logic controllers, robotics, calibration tools, electrical power systems, microcontrollers, discrete and analog control systems, data acquisition, and industrial networking. Graduates enter biomedical, chemical, cyber, electrical, industrial, and mechanical fields as control systems engineers, automation engineers, PLC programmers, and instrumentation technicians.

    What you study

    Sensors and calibrationProgrammable logic controllersRoboticsElectrical power systemsMicrocontroller programmingDiscrete and analog controlData acquisition and industrial networking

    What stands out

    • ABET-ETAC accredited under Instrumentation and Control Systems Engineering Technology criteria
    • Housed in the College of Engineering and Science in Ruston, LA
    • Covers discrete and analog controls, PLCs, microcontrollers, and industrial networking
    Visit official program page

    Overall

    71

    of 100

    Click any factor for details

    25% 85
    15% 60
    15% 75
    15% 70
    15% 50
    10% 80
    5% 65
  12. 12

    Clovis Community College · Fresno, CA

    Certificate in Mechatronics/Industrial Automation

    Certificate On-campus Regionally accredited (ACCJC) $1,380/yr 12 mo

    Clovis Community College's 26-unit Certificate of Achievement in Mechatronics/Industrial Automation can be completed in twelve months without prerequisites for introductory courses. Students move directly into lab-paired classes covering mechanical systems, AC and DC electricity, motor controls, PLCs, process control, industrial networking, and automation systems. Students can add general education courses to earn the two-year Associate in Science degree, preparing entry-level technicians for automation, maintenance, and control system roles.

    26 units

    What you study

    Mechanical systemsAC and DC electricityElectric motors and controlsProgrammable logic controllersInstrumentation and process controlIndustrial communications networksIndustrial automation systems

    What stands out

    • Mini-factory lab uses Allen-Bradley CompactLogix PLCs, PowerFlex 4 VFDs, and Honeywell controllers
    • Estimated total cost around $2,000 at $46 per unit including textbooks
    • No prerequisites for ARM 2, ARM 3, ARM 4, or ARM 5 entry courses
    • Graduates pursue Control System Technician, Automation Technician, and Maintenance Mechanic roles

    Industry partners: Allen-Bradley, Rockwell Automation

    Vendor partner: rockwell

    Visit official program page

    Overall

    70

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 74
    10% 100
    5% 65
  13. 13

    Arkansas Tech University - Ozark · Ozark, AR

    Automation Technology AAS

    Associate On-campus Regionally accredited (HLC) $3,360/yr 24 mo

    Arkansas Tech University-Ozark's Automation Technology AAS trains technicians across electronics, mechanics, pneumatics, hydraulics, and computerized industrial controls. Students build skills in PLC programming, electrical and mechanical systems, robotics, sensors and actuators, CAD, networking and data communication, and safety standards, with stackable technical certificates and pathways into ATU's Bachelor of Applied Science or Bachelor of Professional Studies.

    What you study

    Programmable Logic ControlsElectrical SystemsRoboticsMechanical SystemsSensors and ActuatorsComputer Aided DesignNetworking and Data Communication

    What stands out

    • Stacks with Technical Certificates in Industrial Control Systems and Industrial Electronic Technology
    • Transfers into Arkansas Tech University's Bachelor of Applied Science or Bachelor of Professional Studies

    Industry partners: ABB Motors, Hiram Walker Allied Domecq, Tokai Carbon, Tyson Foods

    Visit official program page

    Overall

    70

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 75
    10% 90
    5% 65
  14. 14

    College of Southern Idaho · Twin Falls, ID

    Automation Engineering Technology AAS

    Associate On-campus Regionally accredited (NWCCU) $3,800/yr 24 mo

    College of Southern Idaho offers a 62-credit Associate of Applied Science in Automation Engineering Technology through its Trade and Industry Department. Across four full-time semesters, students complete coursework in DC and AC circuits, CAD engineering graphics, controls and instrumentation, machine maintenance, lean manufacturing, PLC Systems 1 and 2, motor control, robotic systems, and integrated process control. The final term concludes with Automation Engineering Projects and Diagnostics and Troubleshooting.

    62 credits

    What you study

    DC and AC CircuitsControls and InstrumentationMachine Maintenance and Lean ManufacturingPLC Systems 1 and 2Industrial Electronics and Motor ControlRobotic SystemsIndustrial Communications and Process ControlApplied Automation and Troubleshooting

    What stands out

    • 62-credit, four-semester AAS; Basic and Intermediate Technical Certificates also offered
    • Includes optional Cooperative Education / Internships elective for 1 to 8 credits
    • Final semester features Applied Automation, Automation Engineering Projects, and Diagnostics

    Industry partners: Micron Technology, Glanbia, Lamb Weston

    Visit official program page

    Overall

    70

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 74
    10% 90
    5% 65
  15. 15

    Central Arizona College · Coolidge, AZ

    AAS in Automated Industrial Technology

    Associate On-campus Regionally accredited (HLC) $4,150/yr 24 mo

    Central Arizona College offers its two-year Automated Industrial Technology AAS at the Signal Peak Campus with online, hybrid, and face-to-face course options and Fall or Spring starts. Part of Arizona's ReadyTechGo network built with Boeing and Raytheon, the NIMS-aligned curriculum covers mechanical and electrical systems, troubleshooting, programmable logic controllers, fabrication, hydraulics, pneumatics, and welding. Students can earn AIT I and AIT II certificates, reaching entry certification in as little as 16 weeks.

    What you study

    Mechanical systemsElectrical and electronic systemsProgrammable logic controllersHydraulics and pneumaticsIndustrial troubleshootingFabrication and welding

    What stands out

    • Offered online, hybrid, and face-to-face at Signal Peak Campus with Fall and Spring starts
    • Competencies aligned with NIMS; AIT I certificate finishes in as little as 16 weeks
    • Lists local employers including Lucid Motors, Frito Lay, Abbott Nutrition, and Cardinal Glass
    • ReadyTechGo partner program designed around automated assembly systems at Boeing and Raytheon

    Industry partners: Lucid Motors, Nikola, LG Energy

    Visit official program page

    Overall

    70

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 74
    10% 90
    5% 65
  16. 16

    Pittsburg State University · Pittsburg, KS

    BS Mechanical Engineering Technology - Automation Emphasis

    Bachelor's On-campus ABET-ETAC $8,500/yr 48 mo

    Pittsburg State University's ABET-ETAC accredited Mechanical Engineering Technology BS offers an Automation emphasis through the School of Automotive and Engineering Technology. Students study simulation software, PLC programming and interfacing, variable frequency drives, robotic systems and end-effector design, logic circuits, LAN and WAN networking, and kinematics to prepare for roles as automation, control systems, robotics, or mechanical design engineers.

    What you study

    PLC Programming and InterfacingVariable Frequency DrivesRobotic Systems and End-Effector DesignSimulation SoftwareLogic CircuitsLAN and WAN NetworkingKinematics

    What stands out

    • Accredited by the Engineering Technology Accreditation Commission of ABET
    • Gorilla Advantage program extends in-state tuition rates to students from 32 states
    • Prepares graduates for Automation, Control Systems, Robotics, and Mechanical Design Engineer roles
    Visit official program page

    Overall

    70

    of 100

    Click any factor for details

    25% 85
    15% 60
    15% 75
    15% 70
    15% 50
    10% 70
    5% 65
  17. 17

    Mountwest Community & Technical College · Huntington, WV

    AAS in Electronics Technology (Advanced Automation Technology Concentration)

    Associate On-campus Regionally accredited (HLC) $4,300/yr 24 mo

    Mountwest Community and Technical College in Huntington offers a 62- to 63-credit Associate of Applied Science in Electronics Technology with an Advanced Automation Technology concentration. Open-admission students train to troubleshoot electromechanical equipment and control industrial conveyors, motors, and robotics. Core automation courses cover programmable logic controllers, ladder logic programming, motion controls, and a final project development capstone.

    What you study

    Electronics Technology CoreIntroduction to PLC and PACLadder Logic ProgrammingAutomation Motion ControlElectromechanical Troubleshooting and CalibrationAutomation Project Development

    What stands out

    • 62-credit Electronics Technology AAS or 62- to 63-credit Advanced Automation concentration
    • Open admission policy for applicants with a high school diploma or GED
    • Trains students to program PLCs, ladder logic, and motion controls for plant systems
    • Evening eight-week and semester scheduling supports working adults in Huntington

    Industry partners: Steel of West Virginia, Marathon Petroleum

    Visit official program page

    Overall

    69

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 66
    10% 90
    5% 65
  18. 18

    University of Wisconsin-Stout · Menomonie, WI

    BS in Automation Leadership (Online)

    Bachelor's Online Regionally accredited (HLC) $10,100/yr 24 mo

    UW-Stout Polytechnic's BS in Automation Leadership is a degree-completion bachelor's designed for graduates of two-year automation or mechatronics programs and working technicians. Students can transfer up to 88 credits from technical colleges or workplace SACA certifications, taking UW-Stout's 19-credit leadership core, capstone, and remaining general education online while completing hands-on SACA coursework through a partner technical college or employer. Concentrations cover Smart Automation Certification or Welding Technology, with an accelerated BS+MS option in Operations and Supply Management.

    What you study

    Digital transformationInternet of Things in operationsProject managementOrganizational leadershipLean manufacturingAutomation leadership internshipAutomation leadership capstone

    What stands out

    • Accepts up to 88 transfer credits plus Prior Learning Credit for workplace SACA certifications
    • Optional embedded SAP ERP, Six Sigma Green Belt, or Workforce Development Specialist certificates
    • Accelerated BS+MS pathway pairs with UW-Stout's M.S. in Operations and Supply Management
    • Advisory board includes Ashley Furniture, Greenheck, Lab Midwest, SACA, and Wisconsin technical colleges

    Industry credentials

    SACA Industry 4.0 Certifications

    Industry partners: Smart Automation Certification Alliance (SACA)

    Visit official program page

    Overall

    69

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 95
    15% 58
    10% 70
    5% 65
  19. 19

    Cypress College · Cypress, CA

    AS in Mechatronics, Robotics and Automation

    Associate On-campus Regionally accredited (ACCJC) $1,380/yr 24 mo

    Cypress College offers a 60-unit Associate in Science in Mechatronics, Robotics and Automation housed in its Technology and Engineering division. Students complete 29 units of core coursework in embedded systems, process control, circuits, CAD/CAM, electric motors, mechanical systems, hydraulics and pneumatics, PLC programming, and HMI networks. From there, students choose either the Mechatronics and Robotics Operator emphasis or the Mechatronics System Technician emphasis to prepare for careers in food production, petroleum, fabrication, and logistics.

    60 units

    What you study

    Embedded systemsInstrumentation and process controlCAD/CAM in advanced manufacturingElectric motors and controlsHydraulic and pneumatic systemsPLC programmingIndustrial data networks and HMIIndustry 4.0 and IIoT

    What stands out

    • Requires 39 to 41 major units plus Cypress GE or Cal-GETC for 60 total units
    • Two emphases: Robotics Operator (10 units) or System Technician (12 units)
    • Financial aid eligible associate degree inside the Engineering department
    • Targets smart operator and system technician roles in local automation industries
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  20. 20

    San Joaquin Delta College · Stockton, CA

    AS in Automation Technology - Mechatronics

    Associate On-campus Regionally accredited (ACCJC) $1,380/yr 24 mo

    San Joaquin Delta College's 60-unit Associate in Science in Automation Technology - Mechatronics pairs 29.5 units of core technical training with a general education pattern. Students complete computer networks, industrial control systems, AC/DC network analysis, solid state devices, digital logic, advanced electronics troubleshooting, and two robotics and mechatronics systems courses, earning a C or better in every class.

    60 units

    What you study

    Introduction to Computer NetworksIndustrial Control SystemsAC and DC Network AnalysisSolid State DevicesDigital Logic, Circuits, and SystemsAdvanced Electronics TroubleshootingRobotics / Automation IntroductionRobotics and Mechatronics Systems

    What stands out

    • 60-unit AS degree including 29.5 core major units with a C or better grade requirement
    • Students build and control pick-and-place pneumatic systems and write PLC ladder logic diagrams
    • Supports Delta GE (27 units), CSU-GE (40 units), or IGETC (37 units) patterns
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  21. 21

    Randolph Community College · Asheboro, NC

    AAS in Automation Engineering Technology

    Associate On-campus Regionally accredited (SACSCOC) $2,280/yr 24 mo

    Randolph Community College's 74-credit Automation Engineering Technology AAS (A40120) is sequenced across five terms over two years with day, evening, online, and hybrid course options. Major classes cover schematics, digital electronics, basic CAD, two semesters of circuit analysis, motors and controls, hydraulics and pneumatics, industrial robotics featuring EPSON systems, PLC programming and interfacing, automation troubleshooting, and Fieldbus systems. The college also offers a 41-credit Diploma, a 14-credit PLC Certificate, and a 16-credit Robotics Certificate.

    74 credits

    What you study

    Diagrams and schematicsDigital electronics and basic CADCircuit analysis and motor controlsHydraulics and pneumaticsProgrammable logic controllersIndustrial roboticsAutomation troubleshootingFieldbus systems

    What stands out

    • 74 semester credits over five terms (four semesters plus one summer)
    • Offered in day, evening, online, and hybrid formats
    • Also offers a 41-credit Diploma, 14-credit PLC Certificate, and 16-credit Robotics Certificate
    • Showcases EPSON robotics systems; covers conventional and VFD motor controls
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  22. 22

    Cleveland Community College · Shelby, NC

    AAS in Automation Engineering Technology

    Associate On-campus Regionally accredited (SACSCOC) $2,432/yr 24 mo

    Cleveland Community College's Automation Engineering Technology AAS (A40120) requires 64 to 65 credit hours across a two-year, five-term suggested sequence, combining 49 major credits with 15 to 16 general education credits. Major classes cover two semesters of circuit analysis, digital electronics, motors and controls, introductory and applied PLCs, robot programming, sensors and transducers, hydraulics and pneumatics, industrial safety, and Fieldbus systems. Students finish with two major elective credits in building automation, basic welding, or work-based learning.

    What you study

    Circuit analysis I and IIMotors and controlsPLC programming and applicationsRobot programmingSensors and transducersDigital electronicsHydraulics and pneumaticsFieldbus systems

    What stands out

    • 64 to 65 total credits: 49 major hours plus 15 to 16 general education
    • Two-year full-time sequence spans four semesters plus one summer term
    • Major electives include Building Automation Systems, Basic Welding, or Work-Based Learning
    • Includes 20-hour/week Work-Based Learning options across fall, spring, and summer
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  23. 23

    Johnson County Community College · Overland Park, KS

    Automation Engineer Technology AAS

    Associate On-campus Regionally accredited (HLC) $3,500/yr 24 mo

    Johnson County Community College's 61-credit Automation Engineer Technology AAS (Major Code 2050, CIP 15.0406) runs four semesters and trains students to build, install, and maintain automated industrial equipment. Required courses include AC/DC circuits, industrial fluid power, industrial code, three semesters of PLCs, motor controls and variable frequency drives, LAN cabling, actuator and sensor systems, industrial robotics, welding, General Industry OSHA-30, and a capstone course.

    61 credits

    What you study

    AC/DC CircuitsIndustrial Fluid PowerPLC I, II, and IIIMotor Controls and VFDsLAN Cabling and InstallationActuator and Sensor SystemsIndustrial RoboticsAutomation Engineer Technology Capstone

    What stands out

    • 61-credit four-semester AAS (16, 15, 15, and 15 hours)
    • Includes three sequential Programmable Logic Controllers courses plus a capstone
    • Embeds Industrial Safety/OSHA-30 (CMGT 100) and Introduction to Welding

    Industry credentials

    General Industry OSHA 30

    Industry partners: Panasonic Energy DeSoto

    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 58
    10% 90
    5% 65
  24. 24

    Mesa Community College · Mesa, AZ

    AAS in Automated Industrial Technology

    Associate On-campus Regionally accredited (HLC) $5,820/yr 24 mo

    Mesa Community College offers an Associate in Applied Science in Automated Industrial Technology as part of Arizona's ReadyTechGo college network, built with input from Boeing and Raytheon. Students train to operate, monitor, and maintain automated electro-mechanical, product assembly, process control, and distribution equipment through stackable courses that start with entry certifications in as little as two weeks. Eleven Certificates of Completion are offered alongside the AAS, which transfers directly into Arizona State University Polytechnic's BAS in Manufacturing Systems.

    What stands out

    • 11 Certificates of Completion including Robotics, Industrial Controls, Semiconductor, and Data Center Operations
    • Transfer pathway directly into ASU Polytechnic's BAS in Manufacturing Systems
    • Grants Prior Learning Assessment credit for IPC, NIMS, OSHA, Python Institute, and SACA certifications
    • ReadyTechGo curriculum developed with Boeing and Raytheon for Maricopa County employers

    Industry partners: Boeing Mesa, Raytheon

    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 66
    10% 80
    5% 65
  25. 25
    Certificate On-campus Regionally accredited (ACCJC) $1,380/yr 12 mo

    San Joaquin Delta College's 33.5-unit Certificate of Achievement in Automation Technician - Mechatronics prepares students to install, program, and repair automated manufacturing systems. The 33.5 units of required courses cover computer networks, industrial control systems, AC and DC network analysis, solid state devices, digital logic, advanced electronics troubleshooting, and two robotics courses. Students must earn a C or better in every course.

    33.5 units

    What you study

    Introduction to Computer NetworksIndustrial Control SystemsAC and DC Network AnalysisSolid State DevicesDigital Logic, Circuits, and SystemsAdvanced Electronics TroubleshootingRobotics / Automation IntroductionRobotics and Mechatronics Systems

    What stands out

    • 33.5-unit Certificate of Achievement requiring a C or better in every course
    • Outcomes cover pick-and-place pneumatic control, PLC ladder logic, and robotics circuit troubleshooting
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 100
    5% 65
  26. 26

    Truckee Meadows Community College · Reno, NV

    Fundamentals of Smart Automation Certificate

    Certificate On-campus Regionally accredited (NWCCU) $2,000/yr 9 mo

    Structured across two semesters totaling 30 credits, Truckee Meadows Community College's Fundamentals of Smart Automation Certificate of Achievement focuses on industrial operations, maintenance, and repair. Students complete a three-course Manufacturing and Automation sequence alongside Industrial Robotics I, material handling, general industry safety, mechatronics programming, and a six-credit class in IIoT, networking, and data analytics. Math and human relations requirements are built into technical classes, and graduates prepare for roles such as machine operator and industrial maintenance technician.

    30 credits

    What you study

    Operations and maintenanceIndustrial roboticsMechatronics programmingIIoT and industrial networkingMaterial handlingGeneral industry safetyManufacturing and automation fundamentals

    What stands out

    • 30 credits split across 17-credit first and 13-credit second semesters
    • Features a 6-credit course in IIoT, networking, and data analytics
    • Targets machine operator and industrial maintenance technician roles
    • Functions as a stepping stone toward an associate degree
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 100
    5% 65
  27. 27

    Yavapai College · Prescott, AZ

    Certificate in Automated Industrial Technology

    Certificate On-campus Regionally accredited (HLC) $2,400/yr 12 mo

    Yavapai College offers a 24-credit, two-semester Automated Industrial Technology Certificate at its Career and Technical Education Center (CTEC) as part of Arizona's ReadyTechGo network. Training teaches students to install, adjust, troubleshoot, and repair automated electromechanical, assembly, and distribution systems combining robotic, mechanical, hydraulic, pneumatic, electrical, electronic, and programmable control hardware. The certificate sits alongside Yavapai's 63-credit Advanced Manufacturing Technology AAS and shorter certificates in Robotics and CNC Machining.

    24 credits

    What you study

    Automated electromechanical systemsProgrammable controlsHydraulic and pneumatic systemsElectrical and electronic devicesIndustrial robotics

    What stands out

    • 24-credit, 2-semester certificate taught at Yavapai's CTEC facility
    • Part of Arizona's ReadyTechGo network alongside a 63-credit Advanced Manufacturing AAS
    • Companion CTEC certificates include 17-credit Robotics and 18-credit CNC Machining
    • Prepares for Electro-Mechanical Technician, Industrial Maintenance Technician, and Machine Mechanic roles
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 100
    5% 65
  28. 28

    Front Range Community College · Longmont, CO

    Robotics and Automation Technology Certificate

    Certificate On-campus Regionally accredited (HLC) $2,600/yr 9 mo

    Front Range Community College's 19-credit Robotics and Automation Technology Certificate is the final step in its three-certificate automation sequence. Beginning each Fall semester, the two-semester plan covers Lean Six Sigma, Programmable Logic Controllers, Specialty Refrigeration Units, Instrument and Process Control II, Introduction to Robotics, and Robotics Technologies. Students must first master competencies from the 28-credit Industrial Maintenance Certificate before starting, and eligible courses accept Credit for Prior Learning.

    19 credits

    What you study

    Lean Six SigmaProgrammable logic controllersSpecialty refrigeration unitsInstrument and process controlIntroduction to roboticsRobotics technologies

    What stands out

    • 19-credit, two-semester sequence (15 credits Semester 1, 4 credits Semester 2) starting each Fall
    • Final tier of three certificates; requires prior Industrial Maintenance competencies
    • Includes Credit for Prior Learning eligible coursework toward entry-level robotics technician roles
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 100
    5% 65
  29. 29

    Stark State College · North Canton, OH

    AAS in Automation and Robotics Technology

    Associate On-campus Regionally accredited (HLC) $3,036/yr 24 mo

    Stark State College's four-semester AAS in Automation and Robotics Technology offers in-person lab training, with online options for many general education classes. Students train on Allen-Bradley family PLCs and FANUC robots while studying AutoCAD, Visual Basic programming, PC repair, industrial sensors, instrumentation, and AC/DC controls. Two stackable certificates, the Basic Robotics Certificate and Automation and Robotics Certificate, run two to three semesters and build into the degree. Graduates prepare for installation, calibration, troubleshooting, and repair roles across manufacturing, steel, energy, and semiconductor industries.

    What you study

    Allen-Bradley PLC programmingFANUC industrial roboticsAutoCAD draftingVisual Basic programmingPC repair and maintenanceIndustrial sensors and instrumentationAC and DC industrial controls

    What stands out

    • Trains on Allen-Bradley family PLCs and FANUC industrial robots over four full-time semesters
    • Includes stackable 2- and 3-semester certificates: Basic Robotics and Automation and Robotics
    • In-person technical labs paired with online options for many required general education courses
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  30. 30

    Hutchinson Community College · Hutchinson, KS

    Automation Engineer Technology AAS

    Associate On-campus Regionally accredited (HLC) $3,300/yr 24 mo

    Hutchinson Community College's AAS in Automation Engineer Technology trains technicians to install, program, and troubleshoot industrial automation equipment. Students study AC and DC circuit measurement, electronics and instrumentation, PLCs and ladder logic, electric, hydraulic, and pneumatic control systems, actuators and sensors, process control, robotics, and electrical troubleshooting across manufacturing environments.

    What you study

    AC and DC Circuit MeasurementElectronics and InstrumentationPLCs and Ladder LogicHydraulic and Pneumatic ControlsActuators and SensorsProcess ControlRoboticsElectrical Troubleshooting

    What stands out

    • Combines PLC ladder logic, process control, fluid power controls, and robotics troubleshooting
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  31. 31

    Tarrant County College District · Fort Worth, TX

    AAS in Robotics and Automation

    Associate On-campus Regionally accredited (SACSCOC) $3,537/yr out-of-district

    Offered at Tarrant County College's South Campus under Electronics Technology, this 60-credit AAS in Robotics and Automation trains students to fabricate, install, operate, and troubleshoot automated and electromechanical equipment. Coursework applies microprocessors, electronics, mechanics, hydraulics, feedback systems, blueprint and schematic reading, and soldering to industrial environments including energy, plastics, aerospace, and electronics manufacturing. Students need college-ready TSI math scores for the Algebraic Math Pathway, and the college also offers 23-credit Electronics and 30-credit Mechatronics Level 1 certificates.

    60 creditsIn-county: $74 per semester credit hour (Fall 2026)

    What you study

    Microprocessors and electronicsMechanics and hydraulicsFeedback and robotic systemsBlueprints, schematics, and diagramsSoldering and electrical measuring tools

    What stands out

    • 60 credits at TCC South Campus; 2026-27 in-county tuition and fees total $4,440
    • Requires college-ready TSI math scores for the Algebraic Math Pathway
    • Level 1 certificates also offered in Mechatronics Technology (30 credits) and Electronics Technology (23 credits)
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  32. 32

    North Idaho College · Coeur d'Alene, ID

    Industrial Robotics and Automation AAS

    Associate On-campus Regionally accredited (NWCCU) $3,650/yr 24 mo

    North Idaho College offers an Associate of Applied Science in Industrial Robotics and Automation, formerly called Mechatronics, at its Coeur d'Alene campus. Students build practical skills in programmable logic controllers, pneumatics, hydraulics, motor controls, AC and DC electrical systems, and industrial robotics. Three credential options let learners finish a one-year certificate, a two-year Advanced Technical Certificate, or the full two-year AAS degree.

    What you study

    Programmable Logic ControllersPneumatics and HydraulicsAC and DC Electrical SystemsMotor ControlsIndustrial Robotics and Automation

    What stands out

    • Three credential paths: one-year ITC, two-year ATC, and two-year AAS
    • Program relocated to North Idaho College's Coeur d'Alene campus
    • Working professionals can take individual courses on a space-available basis
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  33. 33

    Collin County Community College District · McKinney, TX

    AAS in Robotics and Automation Technology

    Associate On-campus Regionally accredited (SACSCOC) $3,750/yr out-of-district

    Collin College's 60-credit AAS in Robotics and Automation Technology prepares specialists to install, test, service, and maintain automated production and distribution equipment. Students build practical skills across mechanical, electrical, hydraulic, pneumatic, and electronics fundamentals while writing PLC ladder logic and robotic software programs. Graduates are prepared for technical roles across food and beverage, pharmaceutical, automotive, electronics, medical, and supply-chain operations, focusing on maximizing system efficiency and output.

    60 creditsIn-district: $65 tuition plus $2 activity fee ($67 per credit hour)

    What you study

    Mechanical and electrical principlesHydraulic and pneumatic systemsIndustrial electronicsPLC ladder logic programmingRobotic software programmingEquipment testing and maintenance

    What stands out

    • 60 semester credit hours through Collin College's Engineering department
    • Covers PLC ladder logic, robotic software, hydraulics, pneumatics, and electronics
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  34. 34

    East Central Community College · Decatur, MS

    Automation and Control Technology AAS

    Associate On-campus Regionally accredited (SACSCOC) $3,750/yr 24 mo

    East Central Community College's Automation and Control Technology AAS is the closest mechatronics-equivalent program in central Mississippi. 60-credit AAS covering PLC programming, motor controls, sensors, and process automation.

    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  35. 35

    Pearl River Community College · Poplarville, MS

    Automation and Controls Technology AAS

    Associate On-campus Regionally accredited (SACSCOC) $3,900/yr 24 mo

    Pearl River Community College offers an Associate in Applied Science in Automation and Controls Technology starting each fall on its Poplarville campus. Students study safety standards, circuit theory and electronics, test and measurement equipment, hydraulic and pneumatic controls, instrumentation, PLC programming, and robotics for careers across aerospace, oil and gas, energy, chemical, manufacturing, mining, and water treatment industries.

    What you study

    Circuit Theory and ElectronicsPLC ProgrammingRoboticsHydraulic and Pneumatic ControlsInstrumentationTest and Measurement EquipmentSafety Standards

    What stands out

    • Offered on the Poplarville campus with fall semester admission
    • Prospective students must submit an interest survey to be considered for program placement
    • Prepares graduates for Automation, I/E Instrumentation, Control Systems, and Robotics Technician roles
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  36. 36

    Truckee Meadows Community College · Reno, NV

    Advanced Manufacturing and Automation Certificate

    Certificate On-campus Regionally accredited (NWCCU) $4,000/yr 12 mo

    This 30-credit Certificate of Achievement at Truckee Meadows Community College spans two 15-credit semesters and prepares students for front-line manufacturing and production roles. Core technical classes cover electrical circuits, fluid power, mechanical drive systems, AC controls, programmable logic controllers, and robotic systems, with a choice between Automated Production Concepts I or Quality Control. Embedded coursework satisfies math and human relations requirements alongside three credits of communications, and the certificate serves as a stepping stone to an associate degree.

    30 credits

    What you study

    Electrical and electronic circuitsFluid power and pneumaticsMechanical drive systemsAC controlsProgrammable logic controllersRobotic systemsQuality control

    What stands out

    • 30 credits completed across two 15-credit full-time semesters
    • Serves as a stepping stone to an associate degree
    • Math and human relations requirements embedded in core technical classes
    • Covers Industry 4.0 concepts, robotic arms, PLCs, and industrial sensors

    Industry partners: Tesla Gigafactory Nevada

    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 58
    10% 90
    5% 65
  37. 37

    Mitchell Technical College · Mitchell, SD

    AAS in Automation Controls / SCADA

    Associate On-campus Regionally accredited (HLC) $4,092/yr 24 mo

    Mitchell Technical College's four-semester AAS in Automation Controls / SCADA trains technicians to design, wire, program, and secure supervisory control and data acquisition systems for utilities, water systems, and industrial plants. Coursework spans industrial electronics, Python and Arduino SCADA programming, motor controls, AutoCAD electrical and P&ID diagrams, introductory and advanced Allen-Bradley and Siemens PLCs, FactoryTalk and Ignition SCADA software, industrial networking, robotics using IEC 61131-3 standards, and a seven-credit SCADA lab. Students earn OSHA 10 certification and prepare for CompTIA Network+.

    What you study

    Industrial electronics and wiringSCADA programming and softwareP&ID and electrical CADMotor controlsAllen-Bradley and Siemens PLCsIndustrial networking and telemetryRobotics and IEC 61131-3Process controls and SCADA lab

    What stands out

    • Four-semester sequence culminates in a 7-credit SCADA Testing & Control Lab
    • Uses FactoryTalk, Ignition, WonderWare, Studio 5000, and AutoCAD Electrical
    • Optional third-year Automation Engineering AAS continuation available
    • Requires purchasing a preloaded Mitchell Tech laptop (est. $1,150 to $1,875)

    Industry credentials

    OSHA 10 General IndustryCompTIA Network+
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  38. 38

    Sinclair Community College · Dayton, OH

    AAS in Automation & Control Technology with Robotics

    Associate On-campus Regionally accredited (HLC) $4,129/yr

    Sinclair Community College's 63-67 credit Automation & Control Technology with Robotics AAS (AMCT.S.AAS) prepares technicians to install, program, and troubleshoot manufacturing and supply-chain work cells using PLCs, industrial robots with teach-pendant programming, vision systems, sensors, motors, and pneumatics, finishing with an Automation & Control Capstone. Embedded certificates are awarded automatically along the way, and formal transfer agreements support four-year continuation. Sinclair is accredited by HLC.

    What you study

    DC and AC circuitsIndustrial machine wiringProgrammable logic controllersRobotics in CIM systemsSensors and vision systemsFluid power and controlTeach pendant robot programmingAutomation and control capstone

    What stands out

    • 63 to 67 credit hours including an Automation & Control Capstone
    • Embedded certificates are awarded automatically as students complete requirements
    • Includes optional 3-credit Automation & Control Technology Internship
    • Formal articulation agreements support transfer into four-year colleges
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 80
  39. 39

    Bismarck State College · Bismarck, ND

    AAS in Industrial Automation & Robotics

    Associate On-campus Regionally accredited (HLC) $4,167/yr

    Bismarck State College runs an on-campus, limited-enrollment AAS in Industrial Automation & Robotics that starts each Fall. The program teaches students to install, maintain, repair, operate, and troubleshoot physical machines and control systems across manufacturing, food and beverage, energy, and logistics. Training covers electrical, hydraulic, and mechanical systems, motors, programmable logic controllers, robotic arms, sensors, machine vision, and schematic reading. Credits stack directly into BSC Bachelor of Applied Science degrees in Mechatronics Engineering Technology, Operations Management, or Energy Management.

    What you study

    Electrical and electronic systemsHydraulic and mechanical systemsMotors and PLCsRobotic arms and sensorsMachine vision technologiesSchematics and print reading

    What stands out

    • Limited-enrollment on-campus AAS with Fall-only cohort entry
    • Credits stack into BSC BAS degrees in Mechatronics, Operations, or Energy
    • U.S. Department of Labor funded; veterans and eligible spouses get priority
    • Recommends high school algebra and applied physics; notes 50+ lb lifting
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  40. 40

    Lorain County Community College · Elyria, OH

    AAS in Automation Engineering Technology - Systems Specialist

    Associate On-campus Regionally accredited (HLC) $4,200/yr 24 mo

    Lorain County Community College launched Ohio's first associate degree in mechatronics technology (MEMS focus) in 2014 and reports a 100 percent placement rate. The AAS in Automation Engineering Technology - Systems Specialist sits in LCCC's second-lowest tuition tier in Ohio (around $4,200/year). Articulates directly into LCCC's own BAS in Smart Industrial Automated Systems Engineering Technology for four-year continuation without leaving the institution.

    What you study

    Industrial RoboticsComputer Numerical Control (CNC)Programmable Logic ControllersMechanical Engineering TechnologyElectrical and Electronic CircuitsPneumatics and HydraulicsQuality Control

    What stands out

    • Earn and Learn program pairs classes with paid, on-the-job industrial training
    • LCCC also offers a bachelor's in Smart Industrial Automated Systems Engineering Technology
    • Department also offers a Robotics Operator Certificate of Completion
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  41. 41

    Lorain County Community College · Elyria, OH

    BAS in Smart Industrial Automated Systems Engineering Technology

    Bachelor's On-campus Regionally accredited (HLC) $4,200/yr 48 mo

    Lorain CCC launched the Smart Industrial Automated Systems Engineering Technology BAS in Fall 2022, with the first cohort graduating in May 2025. Total program cost is advertised at around $15,000 across four years (community college tuition for both lower and upper division). Earn-and-Learn paid placements with regional manufacturers are embedded throughout the degree pathway. Open only to students who have completed (or are completing) the AAS in Automation Engineering Technology.

    What you study

    Electrical and Mechanical SystemsSoftware ProgrammingIndustrial Networking and SecuritySensors and Automated EquipmentHuman Factors Engineering

    What stands out

    • Earned ARM Institute Endorsement for workforce relevance and instructional quality
    • Builds directly on LCCC's AAS in Automation Engineering Technology - Systems Specialist
    • Not listed as ABET accredited; the college says it will be designed to meet ABET requirements
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  42. 42

    Western Iowa Tech Community College · Sioux City, IA

    AAS in Robotics and Automation

    Associate On-campus Regionally accredited (HLC) $4,296/yr

    Western Iowa Tech Community College's 73-credit Associate of Applied Science in Robotics and Automation runs at the Sioux City campus and prepares technicians to install, integrate, maintain, and repair automated manufacturing equipment. Training builds entry-level technical proficiency across mechanical and electrical systems, motors, conveyors, industrial controls, programmable logic controllers, and other electromechanical production devices. The curriculum places strong emphasis on industrial safety procedures so graduates can work safely in manufacturing and production environments.

    73 credits

    What you study

    Mechanical and electrical systemsIndustrial motors and conveyorsIndustrial controlsProgrammable logic controllersIndustrial safety procedures

    What stands out

    • 73-credit Associate of Applied Science delivered at the Sioux City campus
    • Focuses on integrating, installing, maintaining, and troubleshooting motors, conveyors, controls, and PLCs
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  43. 43

    Mid-State Technical College · Wisconsin Rapids, WI

    AAS in Automation & Instrumentation Technology

    Associate On-campus Regionally accredited (HLC) $4,339/yr 24 mo

    Mid-State Technical College's 62-credit, two-year AAS in Automation and Instrumentation Technology runs in person at its AMETA Center with Fall and Spring starts. Across four terms, students complete electrical circuits, process equipment, instrumentation principles, AutoCAD Electrical, industrial networking, two PLC courses, process control strategies, power applications, and HMIs and robotics. Published estimated cost is $11,791.44, with Credit for Prior Learning and high school Fast-Track credit available. Four-year transfer agreements allow graduates to continue toward bachelor's degrees, often as juniors.

    62 credits

    What you study

    Electrical circuitsProcess equipment and documentationInstrumentation principles and measurementsAutoCAD ElectricalBeginning and advanced PLCsIndustrial networkingProcess control and troubleshootingHMIs and industrial robotics

    What stands out

    • 62 credits over four terms at the AMETA Center with Fall and Spring starts
    • Published estimated program cost is $11,791.44 with 100% Mid-State graduate satisfaction rate
    • Offers Credit for Prior Learning, high school Fast-Track dual credit, and junior-level university transfer
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  44. 44

    Fox Valley Technical College · Appleton, WI

    AAS in Automated Manufacturing Systems Technology

    Associate On-campus Regionally accredited (HLC) $4,485/yr

    Fox Valley Technical College's 60-credit AAS in Automated Manufacturing Systems Technology (10-628-3) runs full-time or part-time at the Appleton campus with spring, summer, and fall start dates. Students learn to design, install, program, troubleshoot, and repair integrated systems spanning electronics, computers, control systems, programming, robots, fluid power, and sensors. Admission requires an academic skills assessment, 2.75 high school GPA, prior associate degree, or qualifying GED/ACT scores. Estimated program tuition and fees total $11,200 plus $1,405 for textbooks, with bachelor's transfer agreements available.

    60 credits

    What you study

    ElectronicsControl systemsComputer programmingIndustrial roboticsFluid powerSensors and troubleshooting

    What stands out

    • 60 credits offered full-time or part-time in Appleton with 3 annual starts
    • Estimated total program tuition and fees of $11,200 plus $1,405 textbooks
    • Admission via 2.75 high school GPA, prior degree, or $15 Accuplacer
    • Credit transfer agreements available with two- and four-year colleges
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  45. 45

    Northeast Wisconsin Technical College · Green Bay, WI

    AAS in Automation Engineering Technology

    Associate On-campus Regionally accredited (HLC) $4,485/yr 24 mo

    Northeast Wisconsin Technical College's four-semester Automation Engineering Technology AAS (106641) is offered full-time or part-time in Green Bay and Marinette with day, evening, and Saturday lab access at the Engineering Technology Center. Six stackable certificates (Automation Fundamentals, Controls Systems, Motors and Drives, Robotics, Advanced PLC, and Industrial Controls Cybersecurity) apply toward the degree, with 2+2 university transfer options.

    62 credits

    What you study

    AC/DC electricity and motor controlPneumatics and hydraulicsPLC programming sequenceRobotics and robotic vision systemsPower electronics, drives, and HMIsServo systems and motion programmingIndustrial networking and process controlAutomation systems integration

    What stands out

    • 62 credits in four semesters using 8-week modular courses in Green Bay and Marinette
    • Engineering Technology Center lab offers day, evening, and Saturday access
    • Some credits from six certificates, including Advanced PLC and Cybersecurity, apply toward the AAS
    • NWTC Graduate Outcome Survey reports a $63,500 three-year median annual wage; 2+2 transfers available
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  46. 46

    Northwood Technical College · New Richmond, WI

    AAS in Automation for Industrial Systems

    Associate On-campus Regionally accredited (HLC) $4,485/yr 24 mo

    Offered at the New Richmond campus, Northwood Technical College's 64-credit, two-year AAS in Automation for Industrial Systems blends industrial networking, IT security, PLC and distributed control system programming, power electronics, motor control, and process instrumentation. Students automatically stack two embedded technical diplomas along the way: IT-Network Technician (19 credits) and Industrial Systems Specialist (28 credits). Estimated 2026-27 total program tuition is $11,249 plus $700 for tools and uniforms. Five-year graduate surveys (2020-2024) report 100% related-field employment within six months.

    64 credits

    What you study

    Cisco CCNA networkingPLC programming and interfacingDistributed control systemsProcess control and instrumentationIndustrial power electronicsMotor control and pilot devicesIndustrial automation case project

    What stands out

    • 64 credits over 2 years in New Richmond; 2026-27 estimated tuition $11,249
    • Embeds IT-Network Technician (19 cr) and Industrial Systems Specialist (28 cr) diplomas
    • 2020-2024 graduate surveys report 100% related-field employment within 6 months
    • Active International Society of Automation Club and DOL Smarts & Parts funding
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  47. 47

    Sussex County Community College · Newton, NJ

    AAS in Technical Studies: Robotics & Automation Technology Option

    Associate On-campus Regionally accredited (MSCHE) $4,800/yr 24 mo

    Sussex County Community College's ARM Institute-endorsed Robotics and Automation Technology Option AAS in Newton trains technicians to design robotic prototypes and build, test, evaluate, install, and repair automated equipment. Combining mechanical engineering, electrical and electronic circuits, and computer science, the program prepares graduates to operate, upgrade, and maintain unmanned, robotic, and computer-controlled electromechanical systems across industrial, healthcare, transportation, food, and aerospace sectors.

    What you study

    Mechanical Engineering PrinciplesElectrical and Electronic CircuitsComputer ScienceRobotic Prototype DesignElectromechanical Systems Maintenance

    What stands out

    • Endorsed by the Advanced Robotics for Manufacturing (ARM) Institute in Newton, New Jersey
    • Focuses on designing robotic prototypes and maintaining unmanned, automated, and electromechanical systems
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  48. 48

    Waukesha County Technical College · Pewaukee, WI

    AAS in Robotics and Automation Engineering Technology

    Associate On-campus Regionally accredited (HLC) $4,800/yr 24 mo

    Waukesha County Technical College offers a 60-credit, two-year Associate of Applied Science in Robotics and Automation Engineering Technology with daytime on-campus classes starting in August and January. Students study robotics, programmable logic controllers, industrial automation principles, and computer-controlled production machinery in the Terry Lutz Integrated Manufacturing Center. Training includes programming FANUC robots and building automated systems with partner organizations like Discovery World, with four-year transfer agreements available.

    60 credits

    What you study

    FANUC robot programmingProgrammable logic controllersIndustrial automation systemsAutomated production line controls

    What stands out

    • 60-credit daytime AAS with August and January starts in the Terry Lutz Integrated Manufacturing Center
    • Students program FANUC robots and build automated systems with partners such as Discovery World
    • Transfer agreements allow graduates to enter four-year bachelor's programs often at junior standing
    • Lightcast lists Waukesha County wages of $58,700 to $77,200 for related automation roles
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  49. 49
    Associate On-campus Regionally accredited (NWCCU) $4,907/yr

    Clark College's Associate in Applied Technology in Mechanical and Instrumentation Automation (Plan Code ETEMIAPT) requires 101 credits/units across general education and Mechatronics (MTX) courses. Major coursework spans DC and AC fundamentals, two levels of fluid power and semiconductors, motor control and drive systems, robotics, laser alignment, and electrical power distribution. Students take three PLC courses including Siemens PLC Level I, a six-credit Process Control Systems course, and a four-credit Capstone/Final Project. Companion Mechatronics Fundamentals and Mechanical and Instrumentation Automation certificates are also available.

    101 units

    What you study

    DC and AC fundamentalsFluid power systemsElectric motor control and drivesSiemens and advanced PLCsRobotic systemsLaser alignmentProcess control systemsMechatronics capstone project

    What stands out

    • Includes three PLC courses: PLC 1, Siemens PLC Level I, and Advanced PLCs
    • Features specialized courses in Laser Alignment (2 cr) and Process Control Systems (6 cr)
    • Concludes with a 4-credit Capstone/Final Project under Plan Code ETEMIAPT (101 credits/units)
    • Companion credentials include Mechatronics Fundamentals (CC) and Mechanical and Instrumentation Automation (CA)
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  50. 50

    Ivy Tech Community College, Indianapolis · Indianapolis, IN

    AAS in Advanced Automation and Robotics Technology

    Associate On-campus Regionally accredited (HLC) $5,154/yr 30 mo

    Ivy Tech's Associate of Applied Science in Advanced Automation and Robotics Technology is a 75-credit program accredited by ATMAE and offered in both hybrid and in-person formats at Indianapolis and 18 other Indiana campuses. The degree combines 48 program-specific credits with 16 general education credits, 9 statewide electives, and 2 institutional credits over four to five semesters. Coursework embeds MSSC Certified Production Technician, OSHA 10-Hour, and Siemens Level 1 certifications alongside stackable 27-credit and 34-credit certificates.

    75 credits

    What you study

    Industrial electrical systemsFluid power systemsMachine maintenance and installationMechanical drivesDigital fundamentals and Siemens controllersAdvanced manufacturing fundamentals

    What stands out

    • 75 credits (48 program-specific) in 4 to 5 semesters; estimated cost $13,379
    • Accredited by ATMAE and offered in both hybrid and in-person formats
    • Embeds MSSC CPT, OSHA 10-Hour, and 21-credit Siemens Level 1 certifications
    • Stackable 27-credit Mechatronics CT and 34-credit TC eligible for Next Level Jobs

    Industry credentials

    MSSC Certified Production Technician (CPT)OSHA 10-HourSiemens Level 1

    Vendor partner: siemens-smscp

    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 58
    10% 80
    5% 80
  51. 51

    Lakes Region Community College · Laconia, NH

    Industrial Automation & Robotics AS

    Associate On-campus Regionally accredited (NECHE) $6,720/yr 24 mo

    Lakes Region Community College offers a 63-credit Associate of Science in Industrial Automation and Robotics preparing graduates for manufacturing production, robotics, process control, and automation technician roles. Students learn CAD/CAM, CNC fabrication, electronics, microcontrollers, programmable logic controllers, C++ programming, networking, and automated manufacturing cells. Every course transfers directly into Plymouth State University's BS in Robotics and Automation through a 2+2 partnership.

    63 credits

    What you study

    Fabrication Technologies (CAD/CAM and CNC)Introduction to ElectronicsMicrocontrollers and PLCsIndustrial Robotics and AutomationObject-Oriented Programming in C++Introduction to NetworksCalculus and Statistics

    What stands out

    • 63-credit AS degree with 2+2 transfer pathway to Plymouth State University
    • All LRCC courses transfer directly toward Plymouth State's robotics bachelor's degree
    • Covers Lights Out automated manufacturing cells using CNC and industrial robots

    Industry partners: Plymouth State University

    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 58
    10% 80
    5% 65
  52. 52

    Pima Community College · Tucson, AZ

    AAS in Automated Industrial Technology

    Associate On-campus Regionally accredited (HLC) $8,262/yr 24 mo

    Pima Community College in Tucson offers a two-year Automated Industrial Technology AAS in both in-person and online formats through its Downtown campus. Part of Arizona's ReadyTechGo network developed with Raytheon Missile Systems and Boeing, the program teaches safety standards, robotics, sensors, industrial computers, electronics, and control systems troubleshooting. Students can stack from a one-semester AIT Level I Certificate and a one-year Level II Certificate into the AAS while preparing for National Institute of Metalworking Skills certifications.

    What you study

    Industrial safety standardsRobotics and control systemsIndustrial computersSensors and smart machinesIndustrial electronics

    What stands out

    • Offered in both in-person and online formats through Pima's Downtown campus
    • Stackable ladder: 1-semester AIT Level I, 1-year Level II, and 2-year AAS
    • Part of Arizona's ReadyTechGo network working with Raytheon Missile Systems and Boeing
    • Prepares for Electro-Mechanical and Industrial Engineering Technician roles in defense, EVs, and robotics

    Industry credentials

    NIMS Certifications

    Industry partners: Raytheon Tucson, Boeing

    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 66
    10% 70
    5% 65
  53. Associate On-campus Regionally accredited (NWCCU) $12,870/yr 24 mo

    Portland Community College's Sylvania campus offers a 99-quarter-credit, six-term AAS in Mechatronics, Automation, and Robotics within Electronic Engineering Technology. Over two-thirds of the classes overlap with the Electronic Engineering Technology AAS, covering electrical circuit analysis, digital systems, semiconductor devices, two terms of microcontrollers and embedded systems, PLC fundamentals, electromechanical systems, motors and motor controls, and electronic control systems.

    99 quarter credits

    What you study

    Electrical Circuit AnalysisDigital Systems 1 to 3Microcontrollers and Embedded SystemsPLC FundamentalsElectromechanical SystemsMotors and Motor ControlsElectronic Control SystemsRF Communications

    What stands out

    • Six-term (2-year) Sylvania campus degree sharing over two-thirds of classes with Electronic Engineering Technology
    • Offers partial transferability into Oregon Institute of Technology's BS in Electronic Engineering Technology
    • Students may substitute OSHA industrial safety training for the EET 188 safety course

    Industry partners: Intel Hillsboro, Lam Research, Qorvo

    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 74
    10% 55
    5% 65
  54. 54

    Cincinnati State Technical and Community College · Cincinnati, OH

    AAS in Electro-Mechanical Engineering Technology - Industrial Automation

    Associate On-campus Regionally accredited (HLC) $13,860/yr 24 mo

    Cincinnati State self-describes its Electro-Mechanical Engineering Technology - Industrial Automation program as the largest of its kind in Ohio. The 70-credit AAS covers PLCs, robotics, motor controls, instrumentation, and process control. Building Automation (EMETB) and Laser (EMETL) sister tracks let students specialize further if they want. Cincinnati-area placement spans GE Aviation Evendale (jet engine manufacturing), Procter & Gamble (process automation), Honda Anna Engine, and broader Cincinnati-NKY manufacturing.

    64 credits

    What you study

    Motors, Controls, and Variable DrivesProgrammable Logic ControllersRobotics and ServomechanismsHydraulics and PneumaticsProcess InstrumentationLaser Fundamentals

    What stands out

    • 64-credit, six-semester AAS including two full-time paid co-op semesters ($17 to $28/hour)
    • Largest EMET program in Ohio with reported starting salaries of $41,984 to $70,458
    • Graduates transfer to Miami University, Northern Kentucky University, and University of Cincinnati
    • Includes OSHA 10 General Industry Safety training within the curriculum

    Industry credentials

    OSHA 10 General Industry Safety

    Industry partners: GE Aviation, Procter & Gamble, Honda

    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 74
    10% 55
    5% 65
  55. 55

    Pennsylvania College of Technology · Williamsport, PA

    BS in Automation Engineering Technology: Robotics & Automation

    Bachelor's On-campus Regionally accredited (MSCHE) $15,450/yr 48 mo

    Pennsylvania College of Technology's BS in Automation Engineering Technology: Robotics & Automation totals 131 credits across 46 courses in eight semesters. The published sequence spans electronic circuits, microprocessors, robotics and fluid power, network installation, two levels of automation control, process control, motion control, SolidWorks 3D modeling, mechanical power transmission, robots and vision systems, and a required final-semester internship. Labs feature PLCs, Cognex cameras, and FANUC robots, with 21 program-related scholarships and an active industry advisory committee.

    131 credits

    What you study

    Digital electronics and microprocessorsRobotics and fluid powerAutomation and motion controlProcess control theory3D parametric modeling with SolidWorksMechanical power transmissionRobots and vision systemsAutomation engineering internship

    What stands out

    • 131 credits across 46 courses in 8 semesters, including a required internship
    • Robotics Lab equipped with PLCs, Cognex vision cameras, and FANUC robots
    • Eligible for 21 program-related scholarships plus 107 additional college scholarships
    • Students must supply a Windows 11 laptop and required tool list

    Industry partners: QorTek, Tzero, KB Systems Inc., Gerhart, Multi-Dimensional Integration, First Quality Products, OWL Services, L3Harris Technologies, Inc., Lutron Electronics Company, Inc., Corning, Inc.

    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 75
    10% 55
    5% 65
  56. 56

    Metropolitan Community College · Omaha, NE

    Industrial Automation/Mechatronics Level II PLC Certificate

    Certificate On-campus Regionally accredited (HLC) $3,000/yr 9 mo

    Metropolitan Community College's Industrial Automation Mechatronics Level II PLC Certificate is a stackable credential targeting working maintenance technicians. Stacks into the MCC Engineering Technology AAS with Mechatronics Emphasis.

    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 90
    5% 65
  57. 57

    Metropolitan Community College · Omaha, NE

    Automation/Mechatronics Level III PLC Certificate

    Certificate On-campus Regionally accredited (HLC) $3,500/yr 9 mo

    Metropolitan Community College's Automation Mechatronics Level III PLC Certificate is the advanced PLC certification stacking from Level II. Targets working technicians wanting higher-tier automation credentialing.

    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 90
    5% 65
  58. 58

    NHTI - Concord's Community College · Concord, NH

    Automation Certificate

    Certificate On-campus Regionally accredited (NECHE) $3,500/yr 12 mo

    NHTI's Automation Certificate is a standalone 12-month credential from the same department running the ETAC-accredited Robotics and Automation Engineering Technology AS. Stacks toward the full AS for students who continue.

    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 90
    5% 65
  59. 59

    Mt. Hood Community College · Gresham, OR

    Mechatronics: Industrial Automation Certificate

    Certificate On-campus Regionally accredited (NWCCU) $4,500/yr 9 mo

    Designed for students who already have a working background in AC/DC electronics, electric motors, and sensors, this 15-quarter-credit certificate at Mt. Hood Community College in Gresham runs across three terms (fall, winter, and spring). The focused sequence comprises nine credits of introductory and intermediate PLCs alongside six credits of FANUC industrial robotics and robotics vision systems.

    15 quarter credits

    What you study

    Intro to Programmable Logic ControllersIntermediate Programmable Logic ControllersRobotics IRobotics II - Vision Systems

    What stands out

    • Three-quarter Gresham certificate totaling 15 quarter credits with C or better within 5 years
    • Trains on FANUC industrial robotics and machine vision systems alongside PLC programming
    • Requires prior knowledge of AC/DC electronics, electric motors, and sensors
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 90
    5% 65
  60. 60

    Iowa Central Community College · Fort Dodge, IA

    AAS in Industrial Robotics and Automation

    Associate On-campus Regionally accredited (HLC) $5,040/yr 24 mo

    Iowa Central Community College's 65-credit AAS in Industrial Robotics and Automation begins each Fall on the Fort Dodge campus and spans four semesters plus a required four-credit summer Electrical Technologies Internship. Technical coursework covers DC and AC fundamentals, robotic programming, industrial electrical systems, motor controls, power distribution, mechanical processes, National Electrical Code, vision systems, pneumatics and hydraulics, instrumentation, and two PLC courses. Students validate and integrate PLCs, HMIs, and VFDs using simulation software, finishing with Integrated Motion Control and Robotics.

    65 credits

    What you study

    DC and AC fundamentalsRobotic programming and vision systemsMotor controls and power distributionProgrammable logic controllersNational Electrical CodePneumatic and hydraulic systemsInstrumentation and controlIntegrated motion control and robotics

    What stands out

    • 65-credit Fall-start AAS on the Fort Dodge campus with a required 4-credit summer internship
    • Integrates PLC, HMI, and VFD programming with simulation software and data analytics
    • Optional technical courses include Robotic Welding, Predictive/Preventative Maintenance, and Introduction to Networks
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  61. 61

    Arapahoe Community College · Littleton, CO

    AAS in Robotics and Automation Technology

    Associate On-campus Regionally accredited (HLC) $5,250/yr 24 mo

    Arapahoe Community College offers a 61 to 62-credit AAS in Robotics and Automation Technology taught in a 6,000-square-foot lab at the DCSD Legacy Campus in Lone Tree equipped with over $2 million in hardware. Built with PMMI to prepare students for PMMI certification, the 40-credit major covers DC/AC circuits, electrical print reading, industrial wiring, motors and controls, fluid power, SolidWorks CAD, basic and advanced PLCs, industrial rotating equipment, and robotics technologies, finishing with a 3-credit internship or capstone.

    What you study

    DC and AC circuitsIndustrial wiring and print readingMotors and controlsFluid powerSolidWorks mechanical CADBasic and advanced PLCsRobotics technologiesAutomated systems capstone or internship

    What stands out

    • 6,000-square-foot lab at DCSD Legacy Campus in Lone Tree with over $2 million in equipment
    • Curriculum partnered with PMMI to prepare students for PMMI certification
    • Includes 10-hour OSHA Voluntary Compliance plus a 3-credit internship or automated systems capstone
    • Electives cover Lean Manufacturing, Process Quality, and 3D Printing/Additive Manufacturing

    Industry credentials

    PMMI Certification
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  62. 62

    Front Range Community College · Longmont, CO

    AAS in Automation & Engineering Technology

    Associate On-campus Regionally accredited (HLC) $5,250/yr 24 mo

    Front Range Community College offers a 61-credit, four-semester AAS in Automation and Engineering Technology at its Boulder County campus inside the Center for Integrated Manufacturing. Hands-on training covers electric motors and controls, solenoids and relays, hydraulic and pneumatic fluid power, pumps and valves, programmable logic controllers, industrial robots, and sensors and actuators. The degree builds on three progressive certificates: Manufacturing Fundamentals (14 credits), Industrial Maintenance (28 credits), and Robotics and Automation Technology (19 credits).

    61 credits

    What you study

    Electric motors and controlsFluid power systemsPumps, valves, solenoids, and relaysProgrammable logic controllersIndustrial roboticsSensors and actuators

    What stands out

    • 61-credit, 4-semester AAS housed in FRCC's Center for Integrated Manufacturing in Boulder County
    • Builds on three certificates: 14-credit, 28-credit, and 19-credit tiers
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  63. 63

    Hennepin Technical College · Brooklyn Park, MN

    AAS in Automation Robotics Engineering Technology

    Associate On-campus Regionally accredited (HLC) $5,342/yr

    Hennepin Technical College offers its Automation Robotics Engineering Technology AAS (plus certificate and diploma options) in daytime and evening schedules at both Brooklyn Park and Eden Prairie. Hands-on training covers industrial robots, PLCs, motor controls, pneumatics, sensors, and Industry 4.0 systems, backed by employer apprenticeship options, PMMI Education and Training Foundation support, and Minnesota Transfer pathways. Hennepin Tech is accredited by HLC.

    What you study

    Industrial roboticsProgrammable logic controllersMotor controlsPneumatic and mechanical systemsSensors and Industry 4.0Automated system troubleshooting

    What stands out

    • Daytime and evening classes at Brooklyn Park and Eden Prairie campuses
    • Fall and spring entry with certificate, diploma, and AAS options
    • Industry apprenticeship options plus WIOA funding eligibility for qualifying adults
    • PMMI University partner with PACK EXPO career center and scholarship support
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  64. 64

    Central Lakes College-Brainerd · Staples, MN

    AAS in Robotics/Automated Systems Technology

    Associate On-campus Regionally accredited (HLC) $5,424/yr 24 mo

    Central Lakes College delivers its two-year AAS in Robotics/Automated Systems Technology at the Staples campus, combining classroom instruction, robotics labs, and potential internship opportunities. Students study the mechanical, electrical, and software systems behind industrial robots, building skills in robotic programming, electrical systems, automation principles, and system integration. Four targeted one-semester certificates cover Robotic Manufacturing, Robotic Human Machine Interface, Robotic Offline Programming, and Robotic Vision. Two companion diplomas, in Mechatronics and Robotics/Automated Systems Technology, are also offered at Staples.

    What you study

    Industrial robot programmingElectrical and mechanical robot systemsIndustrial automation integrationRobotic human machine interfacesRobotic offline programmingRobotic vision systems

    What stands out

    • Two-year AAS at the Staples campus combining robotics labs with potential industry internships
    • Four 1-semester certificates cover Robotic Manufacturing, HMI, Offline Programming, and Robotic Vision
    • Offers companion Mechatronics and Robotics/Automated Systems Technology two-year diplomas
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  65. 65

    Alexandria Technical & Community College · Alexandria, MN

    AAS in Mechatronics

    Associate On-campus Regionally accredited (HLC) $5,478/yr 24 mo

    Alexandria Technical and Community College's 72-credit AAS in Mechatronics spans four semesters (two fall and two spring terms) totaling 95 weekly class hours across paired lectures and labs. Technical coursework emphasizes fluid power alongside automation, covering pneumatic componentry, pneumatic logic circuits, hydraulic components, mobile hydraulics, instrumentation, engineering drafting, applied mechanical components, electrical design, and six credits of programmable logic controllers. Final-year classes add sustainable manufacturing, industrial distribution, advanced circuit design, manufacturing automation, and Minnesota Transfer Curriculum electives. A companion Mechatronics Diploma is also offered.

    72 credits

    What you study

    Pneumatic componentry and logic circuitsFluid power and hydraulic componentsMobile hydraulicsIndustrial instrumentationEngineering drafting and mechanical componentsProgrammable logic controllersElectrical and advanced circuit designManufacturing automation

    What stands out

    • 72 credits over four semesters totaling 95 weekly class and lab hours
    • Heavy fluid power focus covering pneumatics, hydraulic components, mobile hydraulics, and circuit design
    • Pairs a 6-credit PLC lecture/lab block with Sustainable Manufacturing and Manufacturing Automation
    • Includes Minnesota Transfer Curriculum (MNTC) electives and a companion Mechatronics Diploma
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  66. 66

    South Central College · North Mankato, MN

    AAS in Mechatronics Engineering Technology

    Associate On-campus Regionally accredited (HLC) $5,490/yr

    South Central College's Mechatronics Engineering Technology AAS runs at the Faribault and North Mankato campuses (plus four courses available online via iMEC using portable iREAL lab kits), covering mechanical, electronic, fluid power, computer control, and robotics systems. Minnesota State's FY24 graduate survey reports 92.9 percent related-field placement, and Metallica's All Within My Hands foundation funds Metallica Scholars awards for program students.

    What you study

    Mechanical systemsElectronic systemsComputer control systemsFluid powerAutomation and roboticsPLC troubleshooting

    What stands out

    • Offered in Faribault, North Mankato, and remotely via iMEC portable iREAL kits
    • FY2024 Minnesota State survey reports 92.9% placement in related occupations
    • 26.3% of FY2024 graduates continued into further education
    • Metallica Scholars awards available; diploma and maintenance certificate also offered
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  67. 67

    Texas State Technical College · Harlingen, TX

    AAS in Advanced Manufacturing (Automation and Robotics)

    Associate On-campus Regionally accredited (SACSCOC) $5,500/yr 20 mo

    Texas State Technical College offers an in-person Advanced Manufacturing program with associate degree and certificate options across nine Texas locations, replacing its former Mechatronics Technology title. Students build a technical foundation and select from three specializations: Automation and Robotics, Industrial Maintenance, or Semiconductor Technology. Day and night schedules are available, and TSTC backs graduates with a Money-Back Guarantee promising a job offer within six months or a tuition refund.

    What stands out

    • Offered at 9 campuses including Waco, Harlingen, Fort Bend County, and Williamson County
    • Three tracks: Automation and Robotics, Industrial Maintenance, and Semiconductor Technology
    • Includes a FAME track under Industrial Systems - Advanced Manufacturing
    • TSTC refunds tuition if a graduate has no job offer within six months (school's stated guarantee)
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  68. 68

    Minnesota West Community and Technical College · Worthington, MN

    AAS in Mechatronics

    Associate On-campus Regionally accredited (HLC) $5,848/yr 24 mo

    Minnesota West Community and Technical College's AAS in Mechatronics is offered at the Worthington campus and requires 60 credits across four full-time semesters, with typical costs listed at $3,556.50 per semester. Coursework blends mechanical systems, electronics, fluid power, robotics, instrumentation, and computer controls for manufacturing production lines. Students can stack credentials along the way, starting with an 11-credit Mechatronics Foundations Certificate or 35-credit Diploma, or add 9-credit Fluid Power Specialist and Automation Specialist certificates.

    60 credits

    What you study

    Mechanical systemsElectronicsFluid powerComputer controlsRoboticsInstrumentation and process control

    What stands out

    • 60 credits over 4 full-time semesters at the Worthington campus
    • Stackable 11-credit Foundations Certificate and 35-credit, 3-semester Diploma
    • 9-credit Fluid Power Specialist certificate preps for IFPS specialist exams
    • Typical AAS cost listed at $3,556.50 per semester
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  69. 69

    Southeastern Community College · West Burlington, IA

    AAS in Industrial Controls, Automation, and Robotics Technology

    Associate On-campus Regionally accredited (HLC) $6,210/yr 24 mo

    Southeastern Community College's two-year Industrial Controls, Automation, and Robotics Technology (ICART) AAS runs in a flexible open-lab format at the West Burlington and Keokuk campuses. Coursework spans mechanical and electrical systems, automation, robotics, quality control, and OSHA 10-hour safety, stacking on a first-semester Basic Electrical Maintenance Certificate and one-year diploma, and qualifies for Iowa's Last-Dollar Scholarship.

    What you study

    Industrial electricity and AC/DC fundamentalsCNC G/M code programmingMotor controls and motor drivesFluid power and hydraulic troubleshootingAllen-Bradley Studio 5000 PLCsInstrumentation and PID controlSCADA and motion controlIndustrial robotics and iRVision

    What stands out

    • Flexible open-lab delivery at West Burlington and Keokuk campuses; eligible for Iowa's Last-Dollar Scholarship
    • Courses use Allen-Bradley CompactLogix 5000, Studio 5000, FactoryTalk View ME, SCADA, and iRVision
    • Awards Basic Electrical Maintenance Certificate after Term 1 and Diploma after Term 2
    • First-semester Industrial Electricity and Safety Practices award OSHA 10-hour general industry certification

    Industry credentials

    OSHA 10-Hour General Industry Certification
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  70. 70

    Lake Land College · Mattoon, IL

    AAS in Robotic & CIM Automation

    Associate On-campus Regionally accredited (HLC) $7,332/yr out-of-district 24 mo

    Lake Land College's 60-credit AAS in Robotic and CIM Automation (AAS.CIM) spans four semesters combining CAD, machining, welding, robotics, and automation controls. First-year classes cover CAD I and II, electrical principles, industrial robotics, machining, and welding aligned with AWS SENSE I modules. Second-year coursework adds two Allen-Bradley RSLogix PLC courses meeting SACA Automation Specialist I and II credentials, SolidWorks, fluid power, relays and control circuits, CAM, CNC machining, Wonderware-InTouch HMIs, and a final Computer Integrated Manufacturing course.

    60 creditsIn-district: $124 tuition ($159 with fees) per credit hour (2026-27)

    What you study

    CAD and SolidWorks 3D modelingIndustrial roboticsMachining and CNC machiningWelding fundamentalsAllen-Bradley RSLogix PLCsFluid power and relaysWonderware-InTouch HMI programmingComputer-aided and integrated manufacturing

    What stands out

    • 60-credit four-semester AAS (AAS.CIM) ending with a capstone Computer Integrated Manufacturing course
    • Two Allen-Bradley RSLogix PLC courses align with SACA Automation Specialist I (C-207/C-208) and II (C-309)
    • Includes Wonderware-InTouch HMI programming, SolidWorks, CNC machining, and AWS SENSE I welding modules

    Industry credentials

    SACA Automation Specialist I (C-207, C-208)SACA Automation Specialist II (C-309)AWS SENSE I Welding Modules
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  71. 71

    Community College of Allegheny County · Pittsburgh, PA

    AS in Mechatronics Technology

    Associate On-campus Regionally accredited (MSCHE) $7,560/yr out-of-district

    Community College of Allegheny County's AS in Mechatronics Technology (722.3) covers five core technical areas: computer programming, electrical systems, mechanical systems, robotics, and additive manufacturing (3D printing). Through restricted electives, students can specialize in robotics and artificial intelligence, process technology, industrial electronics, or supply chain technology. As an NC3Start school, CCAC pairs coursework with optional Industry 4.0 and robotics credentials validated by Festo, Trane, and the mikeroweWORKS Foundation, alongside Mechatronics and Industrial Robotics certificates.

    In-county: $130 per credit or $1,950 full-time flat rate per semester (2026-27)

    What you study

    Computer programmingElectrical systemsMechanical systemsRobotics and artificial intelligenceAdditive manufacturing (3D printing)Process and supply chain technology

    What stands out

    • Specialize in robotics and AI, process technology, industrial electronics, or supply chain
    • NC3Start school offering Industry 4.0 credentials validated by Festo and Trane
    • Also offers Mechatronics (723.2) and Industrial Robotics Technician (727) certificates
    • High school students can start early via MEC 100 and MEC 102
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  72. 72

    Millersville University of Pennsylvania · Millersville, PA

    BS in Automation & Robotics Engineering Technology

    Bachelor's On-campus Regionally accredited (MSCHE) $7,716/yr 48 mo

    Jointly supported by Applied Engineering, Safety & Technology and Computer Science, Millersville University's four-year BS in Automation & Robotics Engineering Technology (AURO) trains students to design, model, optimize, and automate complex control systems. Coursework integrates applied engineering, computer science, math, and physics across power fundamentals, electronics, mechanical systems, control systems, and formal programming. Lab courses require individual and team-built projects, and students can join the ATMAE Student Chapter ('Ville Robotics Team) and SME.

    What you study

    Power and electronic systemsControl systemsMechanical systemsFormal computer programmingRobotics design and modelingAutomated process control

    What stands out

    • Jointly supported by Applied Engineering, Safety & Technology and Computer Science
    • Lab courses require designing, programming, and building individual and team projects
    • Student groups include ATMAE 'Ville Robotics Team, SME, and CADD Club
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  73. 73

    Lake Michigan College · Benton Harbor, MI

    AAS in Automation Engineering

    Associate On-campus Regionally accredited (HLC) $7,755/yr

    Lake Michigan College structures its AAS in Automation Engineering around a shared technical core and a choice of two specialization tracks. All students take AC and DC electricity, engineering graphics, advanced CAD, hydraulics and pneumatics, programmable controllers, introductory robotics, and two manufacturing automation courses alongside applied math and technical physics. Students then select either the Electrical Controls Track covering networking, motor controls, advanced PLCs, and industrial robotics, or the Mechanical Track covering blueprint reading, GD&T, machine tools, and metallurgy.

    Domestic rate (all US states and territories): $192.50 per contact hour (2026-27)

    What you study

    AC and DC electricityEngineering graphics and CADHydraulics and pneumaticsProgrammable logic controllersIndustrial roboticsManufacturing automationTransformers and motor controlsMachine tool and metallurgy

    What stands out

    • Offers two specialization tracks: Electrical Controls Track or Mechanical Track
    • Electrical Controls Track adds networking foundations, two motor control courses, and advanced PLCs
    • Mechanical Track adds blueprint reading, GD&T, two machine tool courses, and metallurgy
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  74. Associate On-campus Regionally accredited (HLC) $7,800/yr 24 mo

    Southeast Community College's Automation and Robotics AAS track runs 60.5 credit hours over four full-time terms at its Lincoln and Milford campuses, with fall and spring intakes. After a common first term, students specialize in programming and networking PLCs, industrial robots, variable frequency drives, vision systems, fiber optics, and three-phase power, spending roughly half their program in hands-on labs.

    60.5 creditsSCC's estimated AAS cost: $7,684 tuition, $932 books, and $571 tools ($9,187 total)

    What you study

    AC and DC PrinciplesTransformers and Three-Phase SystemsProgrammable Logic ControllersIndustrial RoboticsVariable Frequency DrivesVision SystemsFiber Optics and Data Communication

    What stands out

    • 60.5-credit 4-term AAS on the Lincoln and Milford campuses with an optional 19-credit 2-term Certificate
    • Students spend roughly half their time in industry-equipment labs; SCC reports $67,912 average graduate salary
    • Limited intake seats with waitlists; eligible for the Scott Pathway Scholarship
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  75. 75

    Moraine Valley Community College · Palos Hills, IL

    AAS in Automation and Engineering Technology

    Associate On-campus Regionally accredited (HLC) $7,968/yr out-of-district 24 mo

    Moraine Valley Community College's two-year AAS in Automation and Engineering Technology (code 1521) runs through the Computer Integrated Technologies department for production automation, robotics, industrial networking, and Industrial Internet of Things (IIoT) careers. Students train on industrial robotics systems and automation controllers while focusing on one of five tracks: CAD Automation, Electrical Automation, IT Automation, Mechanical Automation, or Mechatronics. Stackable CAD and Additive Manufacturing Specialist certificates apply toward the AAS. Graduates prepare for robotics, automation, PLC programmer, controls, mechatronics, and field service technician roles.

    In-district: $143 tuition ($168 with fees) per credit hour (2026-27)

    What you study

    Production automationIndustrial robotics systemsAutomation controllersIndustrial networkingIndustrial Internet of Things (IIoT)CAD and mechanical drafting

    What stands out

    • Five specialized tracks: CAD, Electrical, IT, Mechanical Automation, and Mechatronics (code 1521)
    • Stackable certificates include Additive Manufacturing Specialist, AutoCAD Specialist, Autodesk Inventor, and Mechanical Drafting
    • Prepares robotics, automation, controls, mechatronics, field service technicians, and PLC programmers
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  76. 76

    Clover Park Technical College · Lakewood, WA

    BAS in Mechatronics Engineering Technology and Automation

    Bachelor's On-campus Regionally accredited (NWCCU) $8,500/yr 21 mo

    Clover Park Technical College's BAS in Mechatronics Engineering Technology and Automation (META) is the first bachelor's degree in mechatronics offered anywhere in the Pacific Northwest. The Bachelor of Applied Science (BAS) format is designed specifically for AAS holders who want to ladder up to a bachelor's while continuing to work. 21 months full-time or 36-42 months part-time. Curriculum adds engineering math, physics, plus contemporary topics including Industrial IoT, Digital Twins, Sustainable Manufacturing, and Data Analytics. Lakewood, WA location near Joint Base Lewis-McChord and the Seattle-Tacoma manufacturing corridor.

    What you study

    Industrial Internet of ThingsDigital TwinsSustainable ManufacturingData AnalyticsEngineering Mathematics and Physics

    What stands out

    • First mechatronics bachelor's degree offered in the Pacific Northwest
    • Builds on an associate degree in 21 months full-time or 36 to 42 months half-time
    • Accepts new cohorts each Fall and Spring quarter
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 75
    15% 70
    15% 50
    10% 70
    5% 65
  77. 77

    Wichita State University · Wichita, KS

    BS Applied Engineering - Process Automation Concentration

    Bachelor's On-campus Regionally accredited (HLC) $8,800/yr 48 mo

    Wichita State University's 120-credit BS in Applied Engineering with a Process Automation concentration combines 32 math and science credits with 64 major credits inside the College of Engineering. Core classes cover statics, strength of materials, statistical process control, manufacturing methods, and MATLAB, while the concentration adds fluids, circuits, machine elements, industrial controls, robotics technology, microcomputer-based mechanical systems, and a three-course capstone sequence.

    120 credits

    What you study

    Industrial Controls and InstrumentationRobotics TechnologyMicrocomputer-Based Mechanical SystemsElectrical Machines and Electronic CircuitsStatistical Process ControlManufacturing MethodsApplied Engineering Capstone Sequence

    What stands out

    • 120-credit degree combining 32 math and science credits with 64 major credits
    • Requires a three-course applied-learning capstone sequence (APEN 301, 401, and 402)
    • Integrates Wichita State's Engineering+ applied learning requirement into the major

    Industry partners: Spirit AeroSystems

    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 58
    10% 70
    5% 65
  78. 78

    Oakton College · Des Plaines, IL

    AAS in Industrial Automation

    Associate On-campus Regionally accredited (HLC) $10,276/yr out-of-district

    Oakton College's AAS in Industrial Automation, also titled Supply Chain Automation, trains technicians to operate, maintain, and troubleshoot automated manufacturing and distribution equipment. Coursework covers electronics, mechanical systems, welding, hydraulics and pneumatics, industrial robotics, sensing, programmable controllers, and green manufacturing practices. Through a partnership with the Technology and Manufacturing Association (TMA), students can earn course credit or complete a one-semester TMA Industrial Automation Certificate. Oakton's apprenticeship program, Career Development Center, and industry advisory committee connect graduates to supply chain automation, logistics, and maintenance roles.

    In-district: $136.25 per semester hour (2026-27)

    What you study

    Industrial electronicsMechanical systemsIndustrial weldingHydraulics and pneumaticsIndustrial roboticsSensing and programmable controllers

    What stands out

    • Partners with the Technology and Manufacturing Association (TMA) for course credit and a 1-semester certificate
    • Curriculum overseen by an industry advisory committee including S&C Electric, Elettric80, and Haas Factory Outlet
    • Connects students to manufacturing employers through Oakton's apprenticeship program and Career Development Center

    Industry partners: Technology and Manufacturing Association (TMA)

    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 58
    10% 70
    5% 65
  79. 79
    Certificate On-campus Regionally accredited (HLC) $5,000/yr 12 mo

    This two-semester technical certificate from CMU Tech focuses on the core electrical, automation, and mechanical maintenance skills needed in industrial plants. Across 31 semester credits (16 in fall and 15 in spring), students train on DC and AC circuits, electrical safety, industrial controls, PLCs, variable speed drives, fluid power, machine shop operations, and machine maintenance.

    31 credits

    What you study

    Electrical SafetyDC and AC CircuitsIndustrial ControlsProgrammable Logic ControllersAC/DC Variable Speed DriveFluid PowerMachine ShopMachine Maintenance

    What stands out

    • Two-semester sequence of 16 fall credits and 15 spring credits
    • Requires technical math alongside hands-on circuit, PLC, drive, and fluid power training
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 80
    5% 65
  80. 80

    County College of Morris · Randolph, NJ

    Automation, Robotics & Control Certificate

    Certificate On-campus Regionally accredited (MSCHE) $5,490/yr 12 mo

    County College of Morris offers an on-campus Certificate of Achievement in Automation, Robotics, and Control requiring 12 to 19 credits over two to three semesters in Randolph, New Jersey. Coursework combines lectures, computer-based simulation, and laboratory work across circuit analysis, industrial electronics, mechanical components, robotics and automation, PLCs, and experimental design. All certificate credits transfer and stack directly into CCM's associate degree in Electronics Engineering Technology, preparing graduates for instrument, production, and reliability technician roles.

    What you study

    Circuit analysisIndustrial electronicsMechanical componentsRobotics and automationProgrammable logic controllersExperimentation and design

    What stands out

    • Completable in 12 to 19 credits across 2 to 3 semesters on campus
    • Credits fully stack into CCM's Electronics Engineering Technology associate degree
    • Combines industrial lab hardware with computer-based circuit and control simulation
    • Prepares for Instrument, Laboratory, Production, Reliability, and Quality Inspector roles
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 80
    5% 65
  81. 81

    College of Southern Nevada · Las Vegas, NV

    Advanced Manufacturing: Automation AAS

    Associate On-campus Regionally accredited (NWCCU) $8,220/yr 24 mo

    The College of Southern Nevada offers a 60-credit Associate of Applied Science in Advanced Manufacturing with an Automation focus through its Department of Applied Technology. Students combine classroom study and lab work in industrial electricity, mechanical power transmission, fluid power, material science, and automated robotics. The degree requires 27 general education credits and 33 major credits to prepare graduates for manufacturing, industrial, and operations-support roles.

    60 credits

    What you study

    Computer Aided DraftingIndustrial ElectricityMechanical Power TransmissionFluid Power and InstrumentationFerrous and Non-Ferrous MaterialsIndustrial and Materials Handling AutomationAdvanced Automation with RoboticsNetworking Literacy

    What stands out

    • 60 total credits split into 27 general education and 33 major credits
    • Requires C- or higher in all occupational major courses for graduation
    • Includes choices in Network+, Business Data Networks, or CCNA Introduction
    • Financial aid eligible program within the School of Advanced and Applied Technologies
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 70
    5% 65
  82. 82

    University of Northern Iowa · Cedar Falls, IA

    BS in Automation Engineering Technology

    Bachelor's On-campus Regionally accredited (HLC) $8,564/yr 48 mo

    University of Northern Iowa's BS in Automation Engineering Technology requires at least 120 credit hours, including 80 to 81 major hours sequenced across a four-year plan. Required coursework covers C/C++ programming, circuits, digital electronics, electrical power systems, computer-aided instrumentation, programmable logic controllers, CAD, industrial robotics, computer-aided manufacturing, machine design, hydraulics and pneumatics, and a Senior Design research project. Students add three technical electives from areas like linear control systems, microcontrollers, power electronics, or cooperative education.

    120 credits

    What you study

    C/C++ programmingDigital electronicsElectrical power systemsProgrammable logic controllersIndustrial roboticsComputer-aided manufacturingHydraulics and pneumaticsSenior design

    What stands out

    • 120 total credits (80 to 81 major credits) on a four-year plan
    • Includes Senior Design course fulfilling the undergraduate research requirement
    • Technical electives include Linear Control Systems, Microcontrollers, and Cooperative Education
    • Covers Industry 4.0 standards, industrial controllers, CAD, and CAM
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 70
    5% 65
  83. 83

    Waubonsee Community College · Sugar Grove, IL

    AAS in Automation Technology

    Associate On-campus Regionally accredited (HLC) $9,192/yr out-of-district

    Waubonsee Community College's AAS in Automation Technology and stackable Certificate of Achievement train technicians across four campus labs covering mechanical systems, electricity, fluid power, and automated programming. Featured classes include Basic Electricity, Automated Systems I, and two levels of Automated Programming using multiple industrial platforms. Graduates prepare for modern manufacturing duties involving industrial robotics, sensor systems, programmable logic controllers, and hydraulic and pneumatic controls. Local employers regularly visit classes to meet students and highlight hiring companies.

    In-district: $146 per credit hour tuition (2026-27)

    What you study

    Basic electricityAutomated systemsAutomated programmingProgrammable logic controllersSensor systems and roboticsHydraulic and pneumatic controls

    What stands out

    • Training spans four labs covering mechanical, electrical, fluid power, and programming platforms
    • Stacks with the Automation Technology Certificate of Achievement for step-by-step credential progress
    • Local manufacturing employers regularly visit classes to meet students and share hiring opportunities
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 70
    5% 65
  84. 84

    McHenry County College · Crystal Lake, IL

    AAS in Automation, Robotics, and Mechatronics

    Associate On-campus Regionally accredited (HLC) $9,875/yr out-of-district 18 mo

    McHenry County College's 60-credit Automation, Robotics, and Mechatronics AAS takes 80 weeks full time and prepares students to build, test, install, troubleshoot, and maintain robotic and automated equipment. Coursework spans hydraulics and pneumatics, electricity, blueprint reading, motor controls, mechanical assembly, and multidisciplinary capstone projects. Five stackable certificates, including Manufacturing Essentials, Production Technician, Injection Molding, Industrial Maintenance, and Automation Technician, lead into the degree. Local industry internships, workplace tours, and mentoring complement training, with total in-district costs estimated at $10,984.

    60 creditsIn-district: $126.50 per credit hour tuition (Fall 2026)

    What you study

    Hydraulics and pneumaticsIndustrial electricityBlueprint readingMotor controlsMechanical assemblyMultidisciplinary capstone projects

    What stands out

    • 60-credit, 80-week full-time AAS with five stackable certificates from Manufacturing Essentials to Automation Technician
    • Published total program cost is $10,984 in-district ($8,595 tuition plus $2,389 additional costs)
    • Includes local industry internships, workplace tours, guest speakers, job shadowing, and capstone projects
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 70
    5% 65
  85. 85

    College of Lake County · Grayslake, IL

    AAS in Automation, Robotics and Mechatronics

    Associate On-campus Regionally accredited (HLC) $9,944/yr out-of-district 24 mo

    College of Lake County's 61-to-63-credit, two-year AAS in Automation, Robotics and Mechatronics follows the Siemens mechatronics apprenticeship model in day and evening cohorts capped at 16 students. Labs in Grayslake, Waukegan, and Gurnee's 170,000-square-foot Advanced Technology Center feature FANUC 6-axis robots, a Delta spider robot, a Baxter cobot, and Siemens PLCs. Courses cover photonics, IIoT sensors, process control, and a capstone work cell, aligning with SACA and Siemens Level 2 certifications. Estimated in-district cost is $11,214, with WIOA and Metallica Scholarships available.

    In-district: $144.77 tuition plus $33.23 comprehensive fee per credit hour (2026-27)

    What you study

    Mechanical and electrical systemsPhotonics for mechatronicsPLC programming and networksIndustrial and collaborative roboticsPneumatics and hydraulicsIIoT and smart sensorsProcess control and motor controlMechatronics capstone work cell

    What stands out

    • First-year classes pair 1 hour of lecture with 3 hours of daily lab (16-student cap)
    • Labs in Grayslake, Waukegan (evening option), and Gurnee's 170,000-square-foot Advanced Technology Center
    • Equipment includes FANUC 6-axis robots, Delta spider robot, Baxter cobot, and Siemens PLCs
    • Eligible for WIOA vouchers and Metallica Scholarships; $11,214 estimated in-district program cost

    Industry credentials

    SACA Electrical, Mechanical, Fluid Power, PLC, and RoboticsSiemens Level 2 Mechatronics Certification
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 70
    5% 65
  86. 86

    Linn-Benton Community College · Albany, OR

    AAS in Mechatronics / Industrial Automation Technology

    Associate On-campus Regionally accredited (NWCCU) $10,080/yr 24 mo

    Linn-Benton Community College's 90-quarter-credit AAS in Mechatronics/Industrial Automation Technology trains technicians to troubleshoot, maintain, and rebuild mechanical, electrical, and computer-controlled industrial systems. Core classes span CAD for factory automation, drive systems, motors and controls, industrial sensors and actuators, basic and advanced PLC troubleshooting, process control, pneumatics, hydraulics, energy and sustainability, 11 technical elective credits, and a three-course capstone sequence.

    90 quarter credits

    What you study

    CAD for Factory AutomationElectrical Systems TroubleshootingTroubleshooting Motors and ControlsIndustrial Sensors and ActuatorsProgrammable Logic ControllersProcess Control and InstrumentationPneumatics and Hydraulics SystemsCapstone Project Sequence

    What stands out

    • 90-quarter-credit AAS culminating in Capstone Project I, Capstone Project II, and Capstone Assessment
    • 11 technical elective credits let students specialize in Machining, Welding, or Industrial Refrigeration
    • Industrial Refrigeration elective track includes EPA Technician Certification preparation
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 70
    5% 65
  87. 87

    University of Northwestern Ohio · Lima, OH

    AAS in Robotics & Automation Technology

    Associate On-campus Institutionally accredited $12,020/yr

    Housed in the University of Northwestern Ohio's College of Applied Technologies, the Robotics and Automation Technology associate degree caps classes at 20 students and delivers 70% hands-on training. Students train on FANUC, ABB, and Yaskawa/Motoman industrial robots alongside coursework in mechanical and electrical automation, PLCs, AC/DC motors and controls, fluid power, network integration, and work cell design. The program also gives students the opportunity to earn Rockwell PLC certification. Graduates prepare for technical roles across automotive, food processing, packaging, medical, and manufacturing industries.

    What you study

    Mechanical and electrical automationProgrammable logic controllersAC/DC motors and controlsFluid powerIndustrial robotics integrationAutomation controls and networkingWork cell design and implementation

    What stands out

    • 70% hands-on lab training with a strict maximum of 20 students per class
    • Trains on FANUC, ABB, and Yaskawa/Motoman industrial robots on a 200-acre campus
    • Offers students the opportunity to earn Rockwell PLC certification within the associate degree

    Industry credentials

    Rockwell PLC Certification

    Vendor partner: rockwell

    Visit official program page

    Overall

    64

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 58
    10% 55
    5% 65
  88. Bachelor's On-campus Regionally accredited (NECHE) $14,626/yr 36 mo

    Plymouth State University offers a 96-credit three-year Applied Bachelor's degree in Robotics and Automation Engineering focused on Automation Engineering and Mobile Robotics. Students train in HMI and SCADA systems, PLC programming, industrial robot integration, autonomous mobile robots, sensors, and machine learning vision. The condensed curriculum finishes with a Robotics Capstone or an industry internship.

    96 credits

    What you study

    Digital and Analog CircuitsMaterials, Design, and FabricationPLC ProgrammingApplied and Industrial RoboticsAdaptive Control SystemsHMI and SCADA AutomationCyberEthicsRobotics Capstone or Internship

    What stands out

    • Pilot three-year, 96-credit applied bachelor's degree saving a year of tuition
    • Covers both industrial automation (PLC/HMI/SCADA) and autonomous mobile robotics
    • Students can add a Technical Math Minor with Calculus II and Differential Equations
    Visit official program page

    Overall

    63

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 55
    5% 65
  89. Associate On-campus Institutionally accredited $18,900/yr 24 mo

    Johnson College offers a 66-credit Automation and Robotics concentration within its AAS in Mechatronics Technology, laid out across four terms for fall-start students. Paired lectures and labs cover DC and AC electricity, CAD, additive manufacturing, sensors, microcontrollers, two levels of PLCs, two levels of automation and robotics, and Industry 4.0. Students learn to commission, troubleshoot, and document automated cells using ladder and function block logic. The final term ends with a four-credit Capstone Project and Lab or an internship.

    66 credits

    What you study

    DC and AC electricityComputer aided designAdditive manufacturingSensors and microcontrollersProgrammable logic controllersAutomation and roboticsIndustry 4.0 systemsCapstone project or internship

    What stands out

    • 66 credits completed in four terms for fall starts; spring starts require an extra term
    • Term 4 includes a 4-credit Capstone Project and Lab or an industry internship
    • Trains students in PLC/HMI ladder and function block logic plus robot fault recovery
    Visit official program page

    Overall

    63

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 55
    5% 65

BLS OEWS May 2025

Automation Engineering Technology Wage Snapshot

Technician-track graduates map primarily to BLS SOC 17-3024 ($73,900 median, May 2025 OEWS), while four-year graduates moving into controls or automation engineering align with SOC 17-2199 ($122,930 median).

10th percentile

$47,840

Entry-level range

National median

$73,900

SOC 17-3024

90th percentile

$109,890

Experienced / specialized

Source: U.S. Bureau of Labor Statistics OEWS (May 2025), Electro-Mechanical and Mechatronics Technologists and Technicians (SOC 17-3024).

Methodology

How We Ranked These Automation Engineering Technology Programs

We list programs the federal college database files under automation engineering technology, plus any program with Automation in its name. Programs are ordered by our 7-factor score.

Accreditation

25%

Program leadership

15%

Pathways & laddering

15%

Delivery format

15%

Employer signal

15%

Cost & affordability

10%

Reputation

5%

Every score comes from the same directory fields for every program, with no manual rank changes. Programs with the same score are listed by lower tuition, then by school name. Read the full 7-factor methodology →

Automation Engineering Technology Programs: Frequently Asked Questions

What Is the Difference Between Automation Engineering Technology and Mechatronics?
Which Degree Levels Are Available in Automation Engineering Technology?
Are Any Automation Engineering Technology Programs ABET-Accredited or Offered Online?
How Much Does an Automation Engineering Technology Program Cost?
What Do BLS Wage Numbers Show for Automation Careers?

Sources

  1. U.S. Bureau of Labor Statistics: OEWS May 2025 (SOC 17-3024 & 17-2199)
  2. NCES Classification of Instructional Programs: CIP 15.0406 Automation Engineer Technology/Technician
  3. ABET Accredited Programs Directory
  4. Louisiana Tech University: BS in Instrumentation and Control Systems Engineering Technology
  5. Sinclair Community College: AAS in Automation & Control Technology with Robotics
  6. University of Northern Iowa: BS in Automation Engineering Technology
  7. MechatronicsPrograms.com 7-Factor Ranking Methodology

New listings checked November 20, 2026. Wage figures from BLS OEWS May 2025. Confirm current tuition, fees, and admissions requirements on each college's official page.

Sponsored

Mechatronics & Engineering Technology Programs

Schools pay to appear in these listings. They are separate from our rankings, which no school can pay to change.

Not Sure Yet? Get Matched in About a Minute Find My Program