Mechatronics Programs.com

Instrumentation technology

Best Instrumentation Technology Programs (2027)

Instrumentation technology programs train technicians to install, calibrate, and troubleshoot sensors, transmitters, valves, and control loops that measure pressure, flow, temperature, and level in industrial plants. These 26 verified programs across 12 states fit hands-on students targeting process manufacturing, refining, chemical, and energy facilities, mainly through two-year associate degrees alongside applied bachelor's options.

Taylor Rupe, editor of MechatronicsPrograms.com

edited by , b.s. computer science · software engineer

updated

Programs ranked

26

3 bachelor's · 22 associate · 1 certificate

States covered

12

Led by LA (8), TX (7), WA (2)

Annual tuition range

$792 to $11,700

All 26 listed programs

BLS median wage

$73,900

SOC 17-3024, BLS May 2025

Best Instrumentation Technology Programs, Ranked (2027)

  1. 1

    Oklahoma State University Institute of Technology · Okmulgee, OK

    BT in Instrumentation Engineering Technology

    Bachelor's On-campus ABET-ETAC $4,574/yr

    Offered at OSUIT in Okmulgee and OSUIT-Tulsa through the College of Engineering and Construction Technologies, Oklahoma State University Institute of Technology's Bachelor of Technology in Instrumentation Engineering Technology holds ABET-ETAC accreditation under Instrumentation and Control Systems Engineering Technology criteria. Designed with industry input, the curriculum focuses on automation, process control, PLC programming, robotics, and industrial IT networks. Graduates move into energy, biomedical, chemical, cyber, and manufacturing careers as automation engineers, process control technicians, robotics programmers, and oil and gas instrumentation specialists.

    What you study

    PLC programmingRoboticsAutomation technologiesProcess controlIndustrial IT networks

    What stands out

    • ABET-ETAC accredited under Instrumentation and Control Systems Engineering Technology criteria
    • Offered at both OSUIT in Okmulgee and OSUIT-TUL
    • Housed in the College of Engineering and Construction Technologies
    Visit official program page

    Overall

    72

    of 100

    Click any factor for details

    25% 85
    15% 60
    15% 75
    15% 70
    15% 50
    10% 90
    5% 65
  2. Associate On-campus Regionally accredited (HLC) $1,464/yr 24 mo

    San Juan College's two-year AAS in Instrumentation Controls and Electrical Technology runs in the School of Energy, where over 70% of core coursework happens in lab bays exceeding 5,200 square feet. Students wire DC/AC and motor control circuits, calibrate instruments regulating pressure, flow, speed, and temperature, tune industrial processes, and program Allen-Bradley PLCs alongside Energy Pathway courses. Eligible New Mexico residents may qualify for tuition-free study via NM Opportunity and Lottery Scholarships. Alumni work across energy, aerospace, semiconductor, and manufacturing employers.

    What you study

    DC and AC electrical circuitsIndustrial measurement and calibrationMotor control circuitsIndustrial electrical wiringAllen-Bradley PLC programmingIndustrial process tuning

    What stands out

    • Over 70% of core curriculum is practical lab training across 5,200+ square feet of bays
    • Eligible New Mexico residents may qualify for tuition-free study through NM Opportunity and Lottery Scholarships
    • Housed in the School of Energy with Allen-Bradley PLC programming and Energy Pathway courses

    Industry partners: Amazon, Blue Origin, Boeing, Chevron, DJR Energy, Freeport McMoRan, Intel, Phillips 66, Samsung, Taiwan Semiconductor Manufacturing Company

    Visit official program page

    Overall

    71

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 75
    10% 100
    5% 65
  3. Bachelor's On-campus ABET-ETAC $6,401/yr

    Housed in the College of Engineering and Science, Louisiana Tech University's BS in Instrumentation and Control Systems Engineering Technology (ICET) is accredited by ABET-ETAC under Instrumentation and Control Systems Engineering Technology criteria. Students train on sensors, programmable logic controllers, robotics, calibration tools, electrical power systems, microcontrollers, discrete and analog control systems, data acquisition, and industrial networking. Graduates enter biomedical, chemical, cyber, electrical, industrial, and mechanical fields as control systems engineers, automation engineers, PLC programmers, and instrumentation technicians.

    What you study

    Sensors and calibrationProgrammable logic controllersRoboticsElectrical power systemsMicrocontroller programmingDiscrete and analog controlData acquisition and industrial networking

    What stands out

    • ABET-ETAC accredited under Instrumentation and Control Systems Engineering Technology criteria
    • Housed in the College of Engineering and Science in Ruston, LA
    • Covers discrete and analog controls, PLCs, microcontrollers, and industrial networking
    Visit official program page

    Overall

    71

    of 100

    Click any factor for details

    25% 85
    15% 60
    15% 75
    15% 70
    15% 50
    10% 80
    5% 65
  4. 4

    Louisiana Delta Community College · Monroe, LA

    AAS in Industrial Instrumentation Technology

    Associate On-campus Regionally accredited (SACSCOC) $3,214/yr

    Offered at both the Monroe and Ruston campuses, Louisiana Delta Community College's ATMAE-accredited, 61-credit AAS in Industrial Instrumentation Technology, and the college also offers certificates and a Technical Diploma. Coursework spans DC and AC circuits, solid-state devices, practical wiring and fabrication, motor controls, primary and final control elements, temperature/pressure/flow measurement, automatic control loop tuning, safety systems, PLCs, and either analytical measurement or communications and distributed control. Students can also substitute a five-credit Industrial Technology Internship, backed by 12 regional industry partners.

    61 credits

    What you study

    DC/AC and solid-state circuitsPractical wiring and fabricationMotors and motor controlTemperature, pressure, and flowAutomatic control and loop tuningSafety standards and systemsProgrammable logic controllersDistributed control or analytical measurement

    What stands out

    • ATMAE-accredited 61-credit AAS delivered at both Monroe and Ruston campuses with 12 named partners
    • Also offers certificates and a Technical Diploma; optional 5-credit Industrial Technology Internship
    • Transfer students must complete a minimum of 12 technical credit hours at LDCC

    Industry partners: Entergy, HYDRO Extrusions, Ardagh Group, Graphic Packaging International, ANGUS Chemical Company, Lamb-Weston, United Automation, Copeland Electric Company, LLC, Drax Biomass, Kinder-Morgan, Columbia Gulf Transmissions, LLC, Albemarle

    Visit official program page

    Overall

    70

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 75
    10% 90
    5% 65
  5. 5

    Great Basin College · Winnemucca, NV

    BAS in Instrumentation Technology

    Bachelor's Hybrid Regionally accredited (NWCCU) $3,758/yr

    Great Basin College's BAS in Instrumentation Technology is an upper-division continuation of the AAS in Electrical Systems Technology, delivered in a hybrid format with online lectures and in-person labs at the Winnemucca Center. Coursework covers pressure, flow, and temperature measurement and control, systems analysis, and advanced control systems serving Northern Nevada's industrial and mining workforce.

    What you study

    InstrumentationPressure measurement and controlFlow measurement and controlTemperature measurement and controlSystems analysisAdvanced control systems

    What stands out

    • Upper-division BAS built specifically on the AAS in Electrical Systems Technology
    • Hybrid format: online lectures paired with in-person labs at Winnemucca Center
    • Requires two applications: GBC general admission and CTE/BAS program admission
    • Eligible for the MTC Scholarship (March 15 deadline); NORCAT mine training linked
    Visit official program page

    Overall

    69

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 85
    15% 50
    10% 90
    5% 65
  6. 6

    Panola College · Carthage, TX

    AAS in Electrical and Instrumentation

    Associate On-campus Regionally accredited (SACSCOC) $792/yr out-of-district 24 mo

    Housed in Panola College's Energy Department, the 60-credit AAS in Electrical and Instrumentation runs across four semesters for careers in oil and gas, manufacturing, and industrial operations. First-year courses build electrical theory, commercial wiring, energy safety, technical drawing, small engines, and motor control. Second-year study advances into motors and transformers, petroleum instrumentation, SCADA and networking, industrial troubleshooting, pumps and compressors, National Electrical Code, and two levels of PLCs. Advanced Programmable Logic Controllers (ELMT 2339) serves as the program capstone.

    60 creditsIn-district: $33 per semester hour tuition ($60 minimum) plus $68 per hour general fees (2026-27)

    What you study

    Basic electrical theory and wiringEnergy industrial safetyMotor control and transformersBasic and advanced PLCsSCADA and networkingPetroleum instrumentationPumps, compressors, and mechanical drivesNational Electrical Code

    What stands out

    • 60-credit four-semester Energy Department AAS culminating in Advanced PLCs (ELMT 2339) capstone
    • Combines petroleum instrumentation and SCADA networking with National Electrical Code and mechanical drives
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  7. 7

    Lamar State College-Port Arthur · Port Arthur, TX

    AAS in Instrumentation Technology

    Associate On-campus Regionally accredited (SACSCOC) $1,200/yr 24 mo

    Lamar State College-Port Arthur's 60-credit AAS in Instrumentation Technology (INTA) runs across four semesters with flexible scheduling for working adults and summer options to finish faster. Technical coursework covers electronic fabrication, DC-AC circuits, industrial measurements, digital applications, safety, two automatic control courses, analytical instrumentation, distributed control and PLCs, industrial electronics, and calibration. Fourth-semester students choose Unit Operations or an Instrument Technology Internship. A stackable 29-credit certificate (INTC) takes two semesters, and graduates can transfer toward related bachelor's degrees.

    60 credits

    What you study

    Electronic fabrication and DC-AC circuitsIndustrial measurementsPrinciples of automatic controlAnalytical instrumentationDistributed control and programmable logicIndustrial electronicsInstrumentation calibrationUnit operations or internship

    What stands out

    • 60-credit four-semester AAS embeds a 29-credit, two-semester Instrumentation Certificate (INTC)
    • Fourth semester lets students choose between Unit Operations or an Instrument Technology Internship
    • Flexible scheduling for commuters and working adults, with summer courses to shorten completion
    • Can transfer toward bachelor's degrees in Industrial Technology, Electrical Engineering Technology, or Process Technology
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  8. 8

    Lamar Institute of Technology · Beaumont, TX

    AAS in Instrumentation Technology

    Associate On-campus Regionally accredited (SACSCOC) $1,920/yr

    Lamar Institute of Technology's 60-credit AAS in Instrumentation Technology pairs 15 general education hours with 45 program-specific hours totaling 50 lecture hours and 37 lab hours. Beginning courses cover electrical safety, AC and DC electrical theory, multimeters, calibration, transmitters, switches, gauges, and bench-test equipment. Advanced training moves into motor controls, power distribution, PLCs, automation techniques, process control theory, and control loop troubleshooting across hydraulic, pneumatic, and electronic devices. Admission requires no special prerequisites beyond general Institute admission.

    60 credits

    What you study

    Electrical safety and AC/DC theoryCalibration and bench-test equipmentTransmitters, meters, and gaugesMotor control techniquesPower distribution systemsProgrammable logic controllersProcess control and loop theoryHydraulic and pneumatic controls

    What stands out

    • 60 program credits (45 technical, 15 general education) structured with 50 lecture and 37 lab hours
    • Based in the Petroleum and Advanced Technology Center with no special admission requirements
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  9. 9

    Galveston College · Galveston, TX

    AAS in Instrumentation Technology

    Associate On-campus Regionally accredited (SACSCOC) $2,400/yr out-of-district

    Galveston College's Instrumentation Technology AAS is accredited by the National Center for Construction Education and Research (NCCER) within the Industrial and Applied Technology division. Coursework covers basic electrical theory, intelligent integrated control systems, control circuitry testing and analysis, process instrument troubleshooting, calibration, loop optimization, and creating schematics, loop diagrams, and P&IDs. The college also offers three certificates: Level One Entry Level, Level One Advanced Level, and Level Two Advanced Level Technology. Eligible full-time and part-time students can apply financial aid and scholarships.

    Texas resident, in-district: $56 per credit hour tuition ($336 minimum), plus fees

    What you study

    Basic electrical theoryIntegrated control systemsControl circuitry analysisProcess instrument troubleshootingInstrument calibrationProcess control optimizationSchematics, loop diagrams, and P&IDs

    What stands out

    • Accredited by the National Center for Construction Education and Research (NCCER)
    • Also offers three certificates: Level One Entry, Level One Advanced, and Level Two Advanced Technology
    • Outcomes cover P&IDs, loop diagrams, instrument calibration, and tuning process control loops
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  10. 10

    Brazosport College · Lake Jackson, TX

    AAS in Instrumentation Technology

    Associate On-campus Regionally accredited (SACSCOC) $2,613/yr out-of-district

    Brazosport College offers both an Associate of Applied Science and a Certificate in Instrumentation Technology under its Chemical and Refining Industries area of study. Students seeking only the certificate are exempt from TSIA2 placement testing unless taking outside academic courses. Qualifying students can access grant-funded Career Pathways or Catalyst cohort programs, including Catalyst Accelerate for high school students and Catalyst Ignite for seniors. Monthly payment plans start at $30, and free campus support includes the Math Center, Writing Center, and Science Supplemental Instruction.

    In-district: $65 per credit hour tuition, plus mandatory fees (2025-26)

    What stands out

    • May qualify for grant-funded Career Pathways, Catalyst Accelerate, or Catalyst Ignite tuition support
    • Certificate students are exempt from TSIA2 placement testing unless taking outside academic classes
    • Monthly tuition payment plans start at $30, with free Math and Writing Center tutoring
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  11. 11

    Washington County Community College · Calais, ME

    AAS in Electromechanical Instrumentation Technology

    Associate On-campus Regionally accredited (NECHE) $2,880/yr

    Developed through a cooperative partnership with the local paper production industry, Washington County Community College's 63-credit AAS in Electromechanical Instrumentation Technology builds beyond residential and commercial electricity into automated process control. Students study programmable logic controllers, instrumentation, electronic and pneumatic controls, computer electronics, physics, blueprint reading, pipe bending, motor controls, and National Electrical Code requirements. Graduates are prepared to maintain and troubleshoot computer-controlled manufacturing systems locally or regionally, or to transfer into four-year engineering programs.

    63 credits

    What you study

    Programmable logic controllersProcess control and instrumentationElectronic and pneumatic controlsComputer electronicsMotor controls and power circuitsBlueprint reading and pipe bendingNational Electrical Code

    What stands out

    • 63-credit AAS developed in a cooperative partnership with the local paper production industry
    • Expands on Residential and Commercial Electricity with PLC, instrumentation, and pneumatic control training
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  12. 12
    Associate On-campus Regionally accredited (SACSCOC) $2,904/yr out-of-district 24 mo

    Delivered in person at the Northeast Campus, Houston City College's 60-credit, two-year AAS in Instrumentation and Controls Engineering Technology trains technicians to install, calibrate, and maintain pneumatic and digital process control equipment. Students learn to read and sketch PFDs and P&IDs, configure smart transmitters using field communicators, write and validate PLC ladder logic, and troubleshoot simulated process faults. A 43-credit, three-semester Certificate 2 option is also offered at the Northeast Campus. TSI testing is required before enrolling in either credential.

    60 creditsIn-district: $84.50 per semester hour including standard fees (2026-27)

    What you study

    Pneumatic and digital process controlsPFD and P&ID diagramsSmart transmitter configurationPLC ladder logic programmingSimulated process fault troubleshooting

    What stands out

    • 60 minimum credits over two years in person at the Northeast Campus
    • Offers a 43-credit, three-semester Certificate 2 option; both credentials require TSI testing
    • Labs cover field communicators for smart transmitters, native PLC ladder logic, and fault simulation
    Visit official program page

    Overall

    68

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 100
    5% 65
  13. 13

    Delgado Community College · New Orleans, LA

    AAS in Instrumentation & Control

    Associate On-campus Regionally accredited (SACSCOC) $3,214/yr

    Delgado Community College's Associate of Applied Science in Instrumentation and Control prepares graduates for entry-level operator and technician roles in chemical, refining, oil and gas, water, waste management, food, and manufacturing plants. Instruction focuses on common industrial plant processes, instrumentation, and equipment problem-solving. Students learn to operate complex unit operations including distillation, fired boilers, refrigeration systems, cooling towers, and reactors. The program also emphasizes oral and written workplace communication with shift coworkers, supervisors, maintenance teams, safety staff, and contractors.

    What you study

    Industrial process technologyProcess equipment and instrumentsDistillation and fired boilersRefrigeration, cooling towers, and reactors

    What stands out

    • Trains entry-level control and instrumentation operators for refining, chemical, oil and gas, and water plants
    • Covers operating unit processes including distillation, fired boilers, refrigeration, cooling towers, and reactors
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  14. 14

    Northwest Louisiana Technical Community College · Minden, LA

    AAS in Industrial Instrumentation & Electrical Technology

    Associate On-campus Institutionally accredited $3,214/yr

    Northwest Louisiana Technical Community College's Associate of Applied Science in Industrial Instrumentation and Electrical Technology trains students to install, calibrate, maintain, troubleshoot, and repair industrial measurement and control equipment. Shop and classroom instruction covers industrial electrical skills, electronics, motor controls, basic PLCs, distributed control systems (DCS), optical instruments, measurement sensing devices, control valves, and process control management. Courses are led by instructors with 20 to 30 years of field experience, emphasizing shop safety and real-world diagnostic practice.

    What you study

    Industrial electrical and electronicsProgrammable logic controllersDistributed control systems (DCS)Measurement sensing devicesControl valves and final elementsMotor controlsProcess control management

    What stands out

    • Taught by instructors with 20 to 30 years of practical industrial field experience
    • Covers PLCs, DCS, optical instruments, motor controls, sensing devices, and control valves
    • Program reports most students receive job offers before graduation or within six months
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  15. 15

    Bellingham Technical College · Bellingham, WA

    AAS in Instrumentation and Control Technology

    Associate On-campus Regionally accredited (NWCCU) $3,290/yr 18 mo

    Bellingham Technical College offers both AAS and AAS-T options in Instrumentation and Control Technology with annual Fall quarter admission. Training covers maintaining, calibrating, and troubleshooting industrial measuring and control systems for power generation, water treatment, chemical, semiconductor, aerospace, and pulp and paper facilities, with SBCTC reporting a 76 percent placement rate among credentialed BTC graduates.

    106 quarter credits

    What you study

    Direct current and electrical fundamentalsProcess technology equipmentDigital automation, PLCs, and HMIsPressure, level, temperature, and flowFinal control elements and PIDSCADA and DCS (FOUNDATION Fieldbus)Analytical measurement and loop tuningControl strategies and SIS

    What stands out

    • 106 quarter credits completed in six quarters with annual Fall admission (AAS or AAS-T)
    • Published estimated tuition and fees total $16,200 ($2,700 per quarter); 76% SBCTC placement rate
    • Advanced quarters cover FOUNDATION Fieldbus, DCS, SCADA, Ziegler-Nichols PID tuning, and SIS
    • Quarter 3 ends with a group project building a fully automated PLC and HMI system
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  16. 16

    Nunez Community College · Chalmette, LA

    AAS in Instrumentation

    Associate On-campus Regionally accredited (SACSCOC) $3,335/yr

    Nunez Community College's AAS in Instrumentation (AAS-INST) stacks on the Instrumentation Helper and Advanced Certificates of Technical Studies and the NCCER Instrumentation and Electrical Technical Diploma. Students build skills in instrument fitting math, tubing and piping installation, instrumentation electrical circuitry, grounding and shielding, calibration, loop checks, commissioning, and PLCs. The Advanced Certificate, which may be applied toward the AAS, covers NCCER Instrumentation Levels III and IV and prepares students for instrument fitter, instrumentation, industrial maintenance, and process control technician roles across Gulf South manufacturing, petrochemical, and energy plants.

    What you study

    Instrument fitting mathematicsTubing and piping installationInstrumentation electrical circuitryGrounding and shieldingInstrument calibration and configurationLoop checks and commissioningProgrammable logic controllersProcess control operations

    What stands out

    • The Advanced Certificate that applies toward the AAS covers NCCER Instrumentation Levels III and IV
    • Stacks from Instrumentation Helper CTS and Advanced CTS through the Technical Diploma into the AAS
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  17. Associate On-campus Regionally accredited (SACSCOC) $3,335/yr 24 mo

    River Parishes Community College's 61-credit, four-semester AAS in Industrial Instrumentation and Electrical Technology (Instrumentation Concentration) is accredited by ATMAE and offered at the Gonzales, Reserve, and St. Charles campuses. Students progress through introductory, fundamental, intermediate, and advanced instrumentation sequences plus alternative energy and an Industry Troubleshooting Capstone, earning embedded certificates and a technical diploma along the way.

    61 credits

    What you study

    Core industry safetyIntroduction to instrumentationFundamentals of instrumentationIntermediate instrumentationAdvanced instrumentationIntroduction to alternative energyIndustry troubleshooting capstone

    What stands out

    • ATMAE-accredited 61-credit AAS offered at Gonzales, Reserve, and St. Charles campuses (C minimum required)
    • Students earn NCCER Core plus NCCER Instrumentation Levels 1 through 4 industry-based certifications
    • Embeds 9-credit Helper I CTC, 22-credit Helper II CTS, and 46-credit Technical Diploma
    • Fourth semester combines Advanced Instrumentation I and II with an Industry Troubleshooting Capstone

    Industry credentials

    NCCER Core Curriculum IBCNCCER Instrumentation Level 1 IBCNCCER Instrumentation Level 2 IBCNCCER Instrumentation Level 3 IBCNCCER Instrumentation Level 4 IBC
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  18. 18

    SOWELA Technical Community College · Lake Charles, LA

    AAS in Industrial Instrumentation Technology

    Associate On-campus Regionally accredited (SACSCOC) $3,335/yr 24 mo

    SOWELA Technical Community College's 60-credit, four-semester AAS in Industrial Instrumentation Technology (1,065 clock hours) builds from DC and AC electrical principles, generators and transformers, and motor controls into pressure, level, flow, temperature, analytical measurement, DCS, and two levels of PLCs. Credits stack through a 22-credit Electrical Helper certificate and a 45-credit Technical Diploma, and many students also major in Industrial Electrical Technology. SOWELA publishes an estimated AAS tuition of $8,035.80 and reports placement rates exceeding 90% within six months.

    60 credits

    What you study

    DC and AC electrical principlesGenerators and transformersBasic and advanced motor controlsPressure and level measurementsFlow and final control elementsBasic and advanced PLCsIndustrial control systemsTemperature and analytical measurement

    What stands out

    • 60 semester credits (1,065 clock hours) with 92 AAS graduates in 2024-25
    • Published estimated AAS tuition is $8,035.80; 156 students averaged $4,938.58 in grants/scholarships
    • Placement rate exceeds 90% within six months; stacks with 22-credit CTS and 45-credit Diploma
    • Many students pair this degree with SOWELA's Industrial Electrical Technology program
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  19. 19

    Lee College · Baytown, TX

    AAS in Instrumentation Technology

    Associate On-campus Regionally accredited (SACSCOC) $3,915/yr out-of-district 24 mo

    Lee College's four-semester AAS in Instrumentation Technology prepares technicians to install, calibrate, and maintain pressure, flow, temperature, level, and pH control instruments across petrochemical, refining, power, and water facilities. Core coursework covers basic electrical theory, applied petrochemical technology, calibration, PLC programming, automatic control, digital measurement, Hazardous Area Classification, and systems installation. Students also select one 10-to-12-hour guided elective track in Electrical Technology, Analyzer Instrumentation Technology, or Process Instrumentation and Electrical Design. Two companion Certificates of Completion (IF1 and IR1) are also available.

    In-district: $59 per semester credit hour tuition, plus fees (2026-27)

    What you study

    Applied petrochemical technologyBasic electrical theoryInstrumentation calibrationProgrammable logic controllersPrinciples of automatic controlDigital measurement controlsInstrumentation systems installationAnalytical instrumentation or CAD design

    What stands out

    • Choose a 10-12 hour specialization: Electrical Technology, Analyzer Instrumentation, or Instrumentation/Electrical Design
    • Includes Hazardous Area Classification (HAC) safety training alongside PLC and DCS control systems
    • Offers two companion Certificates of Completion: Industrial Instrumentation (IF1) and Instrumentation Technology (IR1)
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  20. 20

    Bismarck State College · Bismarck, ND

    AAS in Instrumentation and Control Technology

    Associate On-campus Regionally accredited (HLC) $4,167/yr 24 mo

    Bismarck State College's 74-credit, four-semester AAS in Instrumentation and Control Technology (59 prescribed credits plus 15 general education credits) starts with DC/AC analysis, digital electronics, solid-state devices, and digital communications before moving into mechanical practices, instrumentation drawings, I/O devices, motors and controllers, controls, and automation. Licensed journeyman electricians or prior-credit students may be eligible to bypass first-year prescribed courses through Prior Learning.

    74 credits

    What you study

    DC and AC circuit analysisDigital electronics and communicationsSolid state and active devicesMechanical practicesInstrumentation drawings and documentsInput and output devicesMotors and controllersControls and automation overview

    What stands out

    • 74 credits across four semesters (59 prescribed technical credits plus 15 general education credits)
    • Pairs nearly every technical lecture with a 1-credit hands-on laboratory course
    • Licensed journeyman electricians may bypass Year 1 prescribed courses through Prior Learning approval
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  21. 21

    Mid-State Technical College · Wisconsin Rapids, WI

    AAS in Automation & Instrumentation Technology

    Associate On-campus Regionally accredited (HLC) $4,339/yr 24 mo

    Mid-State Technical College's 62-credit, two-year AAS in Automation and Instrumentation Technology runs in person at its AMETA Center with Fall and Spring starts. Across four terms, students complete electrical circuits, process equipment, instrumentation principles, AutoCAD Electrical, industrial networking, two PLC courses, process control strategies, power applications, and HMIs and robotics. Published estimated cost is $11,791.44, with Credit for Prior Learning and high school Fast-Track credit available. Four-year transfer agreements allow graduates to continue toward bachelor's degrees, often as juniors.

    62 credits

    What you study

    Electrical circuitsProcess equipment and documentationInstrumentation principles and measurementsAutoCAD ElectricalBeginning and advanced PLCsIndustrial networkingProcess control and troubleshootingHMIs and industrial robotics

    What stands out

    • 62 credits over four terms at the AMETA Center with Fall and Spring starts
    • Published estimated program cost is $11,791.44 with 100% Mid-State graduate satisfaction rate
    • Offers Credit for Prior Learning, high school Fast-Track dual credit, and junior-level university transfer
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  22. 22
    Associate On-campus Regionally accredited (NWCCU) $4,907/yr

    Clark College's Associate in Applied Technology in Mechanical and Instrumentation Automation (Plan Code ETEMIAPT) requires 101 credits/units across general education and Mechatronics (MTX) courses. Major coursework spans DC and AC fundamentals, two levels of fluid power and semiconductors, motor control and drive systems, robotics, laser alignment, and electrical power distribution. Students take three PLC courses including Siemens PLC Level I, a six-credit Process Control Systems course, and a four-credit Capstone/Final Project. Companion Mechatronics Fundamentals and Mechanical and Instrumentation Automation certificates are also available.

    101 units

    What you study

    DC and AC fundamentalsFluid power systemsElectric motor control and drivesSiemens and advanced PLCsRobotic systemsLaser alignmentProcess control systemsMechatronics capstone project

    What stands out

    • Includes three PLC courses: PLC 1, Siemens PLC Level I, and Advanced PLCs
    • Features specialized courses in Laser Alignment (2 cr) and Process Control Systems (6 cr)
    • Concludes with a 4-credit Capstone/Final Project under Plan Code ETEMIAPT (101 credits/units)
    • Companion credentials include Mechatronics Fundamentals (CC) and Mechanical and Instrumentation Automation (CA)
    Visit official program page

    Overall

    67

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 90
    5% 65
  23. 23

    University of Alaska Anchorage · Anchorage, AK

    AAS in Industrial Process Instrumentation

    Associate On-campus Regionally accredited (NWCCU) $6,192/yr 24 mo

    University of Alaska Anchorage delivers its 60-credit AAS in Industrial Process Instrumentation exclusively through Kenai Peninsula College. Coursework covers DC/AC and digital electronics, computer interfacing, PLCs, pneumatic and electronic instrumentation, DCS, SCADA, and instrument loop tuning for petroleum, mining, power, and chemical process industries, and serves as the first two years of UAA's BS in Applied Technologies Leadership.

    60 credits

    What you study

    DC, AC, and digital electronicsComputer systems interfacingDigital control systemsProgrammable logic controllersElectronic industrial instrumentationProcess technology equipmentIndustrial process instrumentationInstrument loop tuning and troubleshooting

    What stands out

    • Delivered exclusively through Kenai Peninsula College with a minimum 60-credit requirement
    • Requires a minimum grade of C in all 48 to 50 major credits
    • Serves as the first two years of UAA's BS in Applied Technologies Leadership
    • Includes four sequential Industrial Process Instrumentation courses plus DCS and SCADA labs
    Visit official program page

    Overall

    66

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 80
    5% 65
  24. 24
    Certificate On-campus Regionally accredited (HLC) $5,000/yr 12 mo

    This two-semester technical certificate from CMU Tech focuses on the core electrical, automation, and mechanical maintenance skills needed in industrial plants. Across 31 semester credits (16 in fall and 15 in spring), students train on DC and AC circuits, electrical safety, industrial controls, PLCs, variable speed drives, fluid power, machine shop operations, and machine maintenance.

    31 credits

    What you study

    Electrical SafetyDC and AC CircuitsIndustrial ControlsProgrammable Logic ControllersAC/DC Variable Speed DriveFluid PowerMachine ShopMachine Maintenance

    What stands out

    • Two-semester sequence of 16 fall credits and 15 spring credits
    • Requires technical math alongside hands-on circuit, PLC, drive, and fluid power training
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 60
    15% 70
    15% 50
    10% 80
    5% 65
  25. 25

    Joliet Junior College · Joliet, IL

    AAS in Process Instrumentation Technology

    Associate On-campus Regionally accredited (HLC) $11,700/yr out-of-district 24 mo

    Joliet Junior College's Process Instrumentation Technology AAS (65 semester hours: 15 general education, 46 major core, and 4 technical electives) prepares students for instrument technician roles. Core courses cover electrical circuits, digital electronics, Industrial Controls I and II, basic and advanced PLCs, fluid power, pneumatic and electronic measurement, control loop tuning, analyzers, and serial industrial data communications.

    65 creditsIn-district: $118 tuition + $35 fees ($153/credit), or $212/credit for differential EEAS courses (2026-27)

    What you study

    Electrical circuits and digital electronicsIndustrial controlsBasic and advanced PLCsIndustrial fluid powerPneumatic measurement and controlElectronic measurement and controlControl loop tuning and analyzingSerial industrial data communications

    What stands out

    • 65-credit four-semester AAS (code TE543): 46 major core, 15 general education, 4 technical electives
    • Includes online and hybrid distance education course options alongside campus labs
    • Fourth semester covers Control Loop Tuning, Analyzing, Serial Data Communications, and Advanced PLCs
    Visit official program page

    Overall

    65

    of 100

    Click any factor for details

    25% 70
    15% 60
    15% 65
    15% 70
    15% 50
    10% 70
    5% 65
  26. 26

    ITI Technical College · Baton Rouge, LA

    AOS in Instrument & Control Systems Technology

    Associate On-campus Nationally accredited (ACCSC) $11,561/yr 24 mo

    ITI Technical College's Associate in Occupational Studies in Instrument & Control Systems Technology requires 99.5 quarter credits across eight terms (24 months) in morning or evening sessions. Lab and classroom training covers electricity, pressure/level/flow/temperature instrumentation, motor controls, basic and advanced PLCs, valves, and process control theory, finishing with a choice of Control Systems or Process Analyzers tracks.

    99.5 quarter credits

    What you study

    Basic electricity and electronicsPressure and level instrumentationTemperature, hydraulics, and flowMotor controls and relay logicBasic and advanced PLCsValves and final control elementsProcess control theoryControl systems or process analyzers

    What stands out

    • 99.5 quarter credits over 8 terms (96 weeks / 24 months), taught 4 days/week
    • Offers both morning and evening sessions at the Baton Rouge campus under program IC10T
    • Final two quarters split into a Control Systems track or Process Analyzers track with chemistry
    • Accredited by ACCSC; alumni highlights feature roles at Chevron, Dow, Tesla, Bayer, and Cameron LNG

    Industry partners: REG/Chevron, Air Products, Cameron LNG, Fairbanks Morse Defense, PBF Energy, Control Worx, John H. Carter Company, Dow Plaquemine, Tesla, Bayer

    Visit official program page

    Overall

    63

    of 100

    Click any factor for details

    25% 50
    15% 60
    15% 65
    15% 70
    15% 75
    10% 70
    5% 65

BLS OEWS May 2025

Instrumentation Technician Wage Snapshot

The Bureau of Labor Statistics reports wages for electro-mechanical and mechatronics technologists and technicians under SOC 17-3024 at a national median of $73,900 per year (May 2025 OEWS).

10th percentile

$47,840

Entry-level range

National median

$73,900

SOC 17-3024

90th percentile

$109,890

Experienced / specialized

Source: U.S. Bureau of Labor Statistics OEWS (May 2025), Electro-Mechanical and Mechatronics Technologists and Technicians (SOC 17-3024).

Methodology

How We Ranked These Instrumentation Technology Programs

We list programs the federal college database files under instrumentation technology, plus any program with Instrumentation in its name. Programs are ordered by our 7-factor score.

Accreditation

25%

Program leadership

15%

Pathways & laddering

15%

Delivery format

15%

Employer signal

15%

Cost & affordability

10%

Reputation

5%

Every score comes from the same directory fields for every program, with no manual rank changes. Programs with the same score are listed by lower tuition, then by school name. Read the full 7-factor methodology →

Instrumentation Technology Programs: Frequently Asked Questions

What Do You Study in an Instrumentation Technology Program?
Where Are Most US Instrumentation Technology Programs Located?
How Much Do Instrumentation Technology Programs Cost?
What Accreditation Do Instrumentation Technology Programs Hold?
How Much Do Technicians in This Field Earn According to BLS Data?

Sources

  1. U.S. Bureau of Labor Statistics: OEWS May 2025 (SOC 17-3024)
  2. NCES Classification of Instructional Programs: CIP 15.0404 Instrumentation Technology/Technician
  3. ABET Accredited Programs Directory
  4. Oklahoma State University Institute of Technology: BT in Instrumentation Engineering Technology
  5. Houston City College: AAS in Instrumentation & Controls Engineering Technology
  6. SOWELA Technical Community College: AAS in Industrial Instrumentation Technology
  7. MechatronicsPrograms.com 7-Factor Ranking Methodology

New listings checked November 20, 2026. Wage figures from BLS OEWS May 2025. Confirm current tuition, fees, and admissions requirements on each college's official page.

Sponsored

Mechatronics & Engineering Technology Programs

Schools pay to appear in these listings. They are separate from our rankings, which no school can pay to change.

Not Sure Yet? Get Matched in About a Minute Find My Program