Mechatronics technician salary in Arizona (2026)

How much does a mechatronics technician make in Arizona?

The spread here is wide, which is normal for a state with a small sample. The bottom 10% of Arizona technicians earn around $41,600 while the top 10% clear $105,730. That is a big gap, and the low end likely reflects a handful of entry or partial-year records rather than a real floor for a trained tech. The middle 50% is the number to trust: between $71,190 and $89,830. If you have a couple of years and a PLC background, expect to sit in that band.

What the location quotient of 0.37 tells you is that Arizona is not a dense market for this specific job title yet. There are only about 120 counted positions. But the pay premium (10% over the US median, 8th nationally) says the employers who do hire mechatronics techs here are paying up to get them, mostly the semiconductor fabs and their equipment vendors. Top-decile earners are the equipment and controls technicians inside the fabs and the ones who cross into automation integration.

Arizona mechatronics salary: BLS vs Salary.com vs Indeed

The three sources disagree hard for Arizona, and it is worth understanding why before you quote a number. BLS says $80,930. Salary.com models $57,208 as of July 2026. Indeed lists about $24 an hour, which annualizes to roughly $49,920. BLS is an employer survey tied to the specific electro-mechanical and mechatronics occupation code, so it captures the fab and industrial-maintenance pay that dominates the real jobs. Salary.com builds a modelled figure from broader HR data under a generic 'mechatronics technician' title, which pulls the average down toward entry level. Indeed's number rests on just 2 reported salaries, so treat it as noise, not a data point.

When you are negotiating, anchor to the BLS median of $80,930 or, better, the Phoenix metro numbers below. Those come from an actual employer survey of the occupation. The Salary.com and Indeed figures are useful only as a reminder that a generic job posting or a green applicant can land well under what a trained tech with certifications commands in an Arizona fab.

Mechatronics technician pay by metro area in Arizona

Phoenix-Mesa-Chandler is the market. It holds about 80 of the state's 120 mechatronics technician jobs and pays a median of $80,930, the same as the state, but the metro mean is higher at $86,580, which tells you the top of the Phoenix market pulls harder than the rest of Arizona. The metro's 10th percentile is $73,320, far above the statewide $41,600 floor, so a technician in the Valley starts higher than the raw state numbers suggest.

The Phoenix top decile reaches $105,730 and the 75th percentile sits at $94,630. Those are the equipment technicians and controls people inside the semiconductor fabs and their tool vendors. If you are choosing where to work in Arizona, this metro is where the pay and the openings both concentrate.

Job outlook for mechatronics technicians in Arizona

Arizona's own projection has electro-mechanical and mechatronics technician employment growing from about 150 to 160 over the 2024 to 2034 window, a 6.8% increase. That is nearly ten times the national rate of 0.7% for the occupation, and it reflects the semiconductor and advanced-manufacturing expansion around Phoenix. The state estimates about 10 openings a year, and most of those come from turnover and retirements rather than brand-new positions, so the door opens more often than a small headcount implies.

You can check the underlying data at the Arizona Office of Economic Opportunity. The takeaway: this is a small occupation growing faster than almost anywhere, which is a good spot to enter early.

How Arizona compares with nearby states

Inside the West, Arizona sits mid-pack on pay at $80,930. It trails Nevada ($82,010), California ($81,550), and Washington ($81,220) by only a few hundred to a couple thousand dollars, so those are near-peers. The outlier is New Mexico, where the median is $119,320, lifted by Intel's Rio Rancho fab and the national labs. If you are willing to move within the region, that gap is worth knowing about.

Who hires mechatronics technicians in Arizona

The biggest driver is semiconductor manufacturing around Phoenix. TSMC Arizona runs a 4-nanometer fab in north Phoenix and hires Equipment Technicians, Instrumentation and Controls Technicians, and Facilities Technicians, roles that map directly to a mechatronics or automation associate degree and PLC/SCADA skills. Intel operates its Ocotillo campus in Chandler and lists fab technician openings on rotating shifts. Both list associate-level electronics, mechatronics, or automation training as the preferred background.

Amkor Technology, the semiconductor assembly and test company, is building a large Arizona operation near Peoria and hires technicians with associate degrees or certifications in process technology, maintenance, and testing. Outside the fabs, aerospace and general manufacturing across the Valley post steady electro-mechanical and automation technician roles, so the fabs set the pay ceiling and the rest of the market follows.

How to earn more as a mechatronics technician in Arizona

Stack the certs the fabs actually screen for

Arizona's best-paying mechatronics jobs are inside semiconductor fabs, and those employers screen for PLC, controls, and instrumentation skills more than any degree line. A focused certification stack in PLC programming and industrial controls is what moves you from the $71,190 band toward the $89,830 to $105,730 top end. It is the single highest-leverage move in this state because the demand is concentrated and specific.

Work in the Phoenix fabs, not the outskirts

The Phoenix-Mesa-Chandler metro pays a mean of $86,580 and a top decile of $105,730, and its entry floor ($73,320) sits well above the statewide low. That is where TSMC, Intel, and Amkor concentrate their equipment and controls roles. If you are working elsewhere in Arizona for a general-manufacturing wage, moving into a Valley fab is a direct raise.

Look at New Mexico or the engineer track

Within the region, New Mexico's median is $119,320, nearly $40,000 over Arizona, driven by the same semiconductor and lab work. If relocating is on the table, that is real money. If it is not, step toward the controls-engineering side: the controls engineer path and the numbers in our mechatronics salary guide show where the ceiling goes once you add design and programming responsibility to the maintenance skill set.

Sources & methodology

Figures on this page come from four independent datasets, retrieved 2026-07-14. Where they disagree, the disagreement is shown rather than averaged away; the source-comparison section explains why each number differs.

• BLS OEWS, SOC 17-3024, May 2025 national and state estimates (state file oesm25st.zip). Employer-reported, the authoritative baseline.
• Salary.com, Mechatronics Technician in Arizona, as of July 01, 2026. HR-reported and modelled averages.
• Indeed, mechatronics technician salaries in Arizona, based on 2 reported salaries. Posting-derived.
• Projections Central, 2024–2034 state occupational projections produced by Arizona's labor market agency (state source).
• Amkor Technology Arizona
• TSMC Arizona technician careers