How much does a mechatronics technician make in Delaware?
Because BLS has no Delaware estimate, the percentile chart beside this uses Salary.com's modeled figures. The middle 50% of mechatronics technician pay in Delaware runs from about $52,264 to $67,456, so most people in the role land in the low-to-mid $60,000s once you factor in shift and experience.
The top decile reaches $74,740, which is roughly where the national median sits. In other words, a Delaware technician has to be near the top of the local range just to match what a typical technician earns nationally. The bottom 10% start near $45,717, close to entry maintenance-tech wages.
With no published state employment count, demand here is best read through job boards, and Delaware's openings cluster around food processing, chemicals, and pharma plants rather than a big auto or semiconductor base.
Bar = middle 50% of wages (25th to 75th percentile). Line = 10th to 90th percentile span. Tick = median.
Delaware mechatronics salary: BLS vs Salary.com vs Indeed
The three sources disagree because they measure different things. BLS surveys employers, but it never published a Delaware figure for this occupation, so there's no government number to anchor to. Salary.com models HR compensation data and lands at $59,456. Indeed averages actual job postings and shows $63,918 annualized, but that number rests on only 4 reported salaries, which is far too thin to trust on its own.
When one source rests on 4 data points and the other is a national model applied to a small state, treat both as rough. For negotiating, use the Salary.com middle range of roughly $52,000 to $67,000 as your floor and ceiling, and push toward the national median of $73,900 if you hold PLC or automation certs, since Delaware's plants compete with higher-paying Maryland and Pennsylvania employers next door.
as of July 01, 2026
4 salaries reported · hourly ×2,080
Dashed line = US median $73,900.
How Delaware compares with nearby states
Delaware sits in the Census South region, and it's on the low end of it for this job. Nearby Maryland posts a $75,330 median and Virginia $74,880, both more than $15,000 above Delaware's local estimate. Even Florida, at the top of the regional group, hits $75,450. Delaware's small plant base keeps its pay closer to the private-source figures than to those neighbors.
500 employed
120 employed
90 employed
570 employed
70 employed
170 employed
270 employed
70 employed
70 employed
140 employed
190 employed
800 employed
1,800 employed
Dashed line = US median $73,900.
Who hires mechatronics technicians in Delaware
Delaware's demand for mechatronics and electro-mechanical technicians comes mostly from food processing. Perdue Farms runs operations in Georgetown and Mountaire Farms in Millsboro, both large poultry plants that keep maintenance and controls technicians on staff to service automated processing lines. Kraft Heinz in Dover has posted for electro-mechanical technicians to support its manufacturing areas.
Chemical and process plants around Newark and Delaware City add more openings for controls and PLC-focused technicians. These employers usually ask for about two years of experience troubleshooting automated, PLC-controlled equipment, and they tend to pay above the entry percentiles because the lines can't sit idle.
How to earn more as a mechatronics technician in Delaware
Stack the certifications plants actually screen for
Delaware's food and chemical plants gate their higher-paying maintenance roles on PLC and automation skills. A focused cert stack in PLCs, industrial controls, and safety can move you from the $52,264 bottom-quartile range toward the $67,456 top quartile. See our mechatronics certifications guide for which credentials employers list most.
Commute or move toward Maryland pay
Delaware's local estimate is roughly 20% under the US median, and the fix might be a short drive. Maryland's median for this occupation is $75,330, more than $15,000 above Delaware's Salary.com average. If you're near Newark or Wilmington, the Cecil County and Baltimore corridors are within commuting range and pay closer to the national number.
Step up to the controls engineer track
The top of Delaware's technician range tops out near $74,740, which is about where technician pay caps. Moving into controls or automation engineering breaks that ceiling. Our controls engineer path and the mechatronics salary guide lay out the jump and what it pays.
Delaware mechatronics technician salary widget (2026)
Running a school site, career center page, or trade publication? Embed this live Delaware salary card. It stays current when the underlying BLS release updates, and it costs nothing.
Embed this salary widget on your site
Free to use for schools, career centers, and publishers. Keep the data-credit link intact.
Delaware mechatronics technician salary FAQ
How much does a mechatronics technician make in Delaware?
What is the starting salary for a mechatronics technician in Delaware?
Is Delaware a good state for mechatronics technicians?
How does Delaware compare with Maryland for mechatronics technician pay?
Why is there no BLS salary data for Delaware?
Which industries hire mechatronics technicians in Delaware?
Sources & methodology
Figures on this page come from four independent datasets, retrieved 2026-07-14. Where they disagree, the disagreement is shown rather than averaged away; the source-comparison section explains why each number differs.
- BLS OEWS, SOC 17-3024, May 2025 national and state estimates (state file oesm25st.zip). Employer-reported, the authoritative baseline.
- Salary.com, Mechatronics Technician in Delaware, as of July 01, 2026. HR-reported and modelled averages.
- Indeed, mechatronics technician salaries in Delaware, based on 4 reported salaries. Posting-derived.
- Perdue Farms careers, Delaware jobs
- Mountaire Farms jobs, Millsboro DE (Glassdoor)