How much does a mechatronics technician make in Georgia?
The spread in Georgia is wide. The middle 50% of mechatronics technicians earn between $56,270 and $85,070, and that $28,800 gap tells you experience and industry matter a lot here. A first-year tech running preventive maintenance sits near the bottom of that band. A senior tech who programs PLCs and troubleshoots robotic cells on an EV line sits near the top.
The top decile is where Georgia gets interesting. The 90th percentile hits $119,080, higher than the national 90th percentile of $109,890. So the best-paid mechatronics technicians in Georgia actually out-earn their national counterparts, even though the median lags. That top pay tends to come from automotive, battery, and aerospace plants that run automation around the clock and pay for people who can keep it running.
The flip side is the low count. With only about 170 of these jobs on the books and a location quotient of 0.34, demand is concentrated in a handful of large employers rather than spread across the state. Where you live inside Georgia matters as much as your resume.
Bar = middle 50% of wages (25th to 75th percentile). Line = 10th to 90th percentile span. Tick = median.
| Percentile | Georgia annual | Georgia hourly | US annual |
|---|---|---|---|
| 10th | $47,620 | $22.90/hr | $47,840 |
| 25th | $56,270 | $27.05/hr | $59,780 |
| 50th (median) | $68,720 | $33.04/hr | $73,900 |
| 75th | $85,070 | $40.90/hr | $88,540 |
| 90th | $119,080 | $57.25/hr | $109,890 |
Source: BLS OEWS May 2025 state estimates for SOC 17-3024 in Georgia.
Georgia mechatronics salary: BLS vs Salary.com vs Indeed
The three big salary sources disagree hard for Georgia, and it is worth knowing why. BLS says the median is $68,720. That comes from a mandatory employer survey (the OEWS program), so it is the most reliable of the three for actual paid wages. Salary.com models a lower average of $56,626 from HR compensation data, which tends to skew toward standardized job titles and can miss the premium that plant automation roles command. Indeed reports $64,321, but that figure rests on just 2 reported salaries. Two. Treat it as noise, not a benchmark.
When you sit down to negotiate in Georgia, anchor on the BLS numbers. Use $68,720 as the median and, if you have real automation and PLC experience, point to the $85,070 upper-quartile figure. Those come from a large employer survey, so they hold up. The Salary.com and Indeed numbers are too low and too thin, respectively, to lean on.
employer-reported survey
same survey, average
as of July 1, 2026
2 salaries reported
Dashed line = US median $73,900.
Job outlook for mechatronics technicians in Georgia
2024 jobs
200
2034 projected
210
Growth
+6%
US: +0.7%
Openings / yr
20
Incl. replacement needs
Georgia's outlook is the bright spot in the data. The state labor department projects mechatronics and electro-mechanical technician jobs growing from about 200 to 210 between 2024 and 2034, a 6% increase. That crushes the national projection of 0.7%, which is essentially flat. The gap reflects Georgia's manufacturing buildout, especially EV assembly and battery production, both of which run on automated lines that need technicians to maintain them.
The state expects roughly 20 openings a year. That may sound small, but against a base of around 200 jobs it is meaningful, because most of those openings come from turnover and retirements, not just brand-new positions. In other words, seats open up every year even in a small field. You can track live projections through the Georgia Department of Labor's data explorer.
How Georgia compares with nearby states
Inside the South, Georgia is middle-tier. Its $68,720 median trails Florida ($75,450) and Virginia ($74,880) by a real margin, edges out neighboring South Carolina ($67,610) and Alabama ($66,660), and beats Tennessee ($64,720) and North Carolina ($63,330). So if you are near a state line, the direction of the pay gradient matters: Florida pays notably more, the Carolinas and Alabama pay a bit less.
500 employed
120 employed
90 employed
570 employed
70 employed
170 employed
270 employed
70 employed
70 employed
140 employed
190 employed
800 employed
1,800 employed
Dashed line = US median $73,900.
Who hires mechatronics technicians in Georgia
The biggest new draw is Hyundai Motor Group Metaplant America (HMGMA) outside Savannah, an EV assembly complex built around AI-driven, highly automated production. Its equipment maintenance roles ask for an associate degree in mechatronics, electrical technology, or industrial maintenance, and the work includes programming and modifying PLCs and automated control systems. That is a textbook mechatronics technician job.
Up north near the Carolina line, SK Battery America runs a large lithium-ion battery plant in Commerce that hires maintenance technicians to troubleshoot and repair production machinery, with a preference for PLC and electrical backgrounds. Between the Savannah EV corridor, the Kia footprint in West Point, and Gulfstream's aerospace operations in Savannah, Georgia's best mechatronics pay clusters around a handful of large, automated plants.
How to earn more as a mechatronics technician in Georgia
Stack the certifications the plants actually screen for
Georgia's top employers, from the Hyundai Metaplant to SK Battery, list PLC and automated-control experience as preferred right in their maintenance postings. That is your fastest lever. A focused certification stack in PLC programming, industrial robotics, and controls moves you from the $56,270 lower-quartile band toward the $85,070 upper quartile, because it is exactly the skill these lines can't run without.
Cross a state line if you are close to one
Georgia's median is $68,720. Drive south into Florida and the median jumps to $75,450, nearly $7,000 more for the same work. That is a bigger raise than most job changes deliver. If you live near the Florida line or would relocate, the regional pay map is worth studying before you sign anything. Alabama and South Carolina pay a touch less, so the profitable move is south, not west.
Step up to the engineering track
The technician ceiling in Georgia is real, but the top decile still clears $119,080. To push past even that, the move is into controls and automation engineering, where you own the design of the systems you used to maintain. Our controls engineer guide and the full mechatronics salary guide lay out the credential and experience path from the plant floor to the engineering title.
Georgia mechatronics technician salary widget (2026)
Running a school site, career center page, or trade publication? Embed this live Georgia salary card. It stays current when the underlying BLS release updates, and it costs nothing.
Embed this salary widget on your site
Free to use for schools, career centers, and publishers. Keep the data-credit link intact.
Georgia mechatronics technician salary FAQ
How much does a mechatronics technician make in Georgia?
What is the starting salary for a mechatronics technician in Georgia?
Is Georgia a good state for mechatronics technicians?
Which companies hire mechatronics technicians in Georgia?
How does Georgia compare with Florida for mechatronics technician pay?
Why do salary sites show different numbers for Georgia?
Sources & methodology
Figures on this page come from four independent datasets, retrieved 2026-07-14. Where they disagree, the disagreement is shown rather than averaged away; the source-comparison section explains why each number differs.
- BLS OEWS, SOC 17-3024, May 2025 national and state estimates (state file oesm25st.zip). Employer-reported, the authoritative baseline.
- Salary.com, Mechatronics Technician in Georgia, as of July 1, 2026. HR-reported and modelled averages.
- Indeed, mechatronics technician salaries in Georgia, based on 2 reported salaries. Posting-derived.
- Projections Central, 2024–2034 state occupational projections produced by Georgia's labor market agency (state source).
- Hyundai Metaplant America (HMGMA) Careers
- SK Battery America jobs, Commerce GA (Glassdoor)